| 热变形和弛豫对低碳贝氏体钢相变的影响 |
| |
| 引用本文： | 杨涛,姚连登,李自刚,赵四新,金学军.热变形和弛豫对低碳贝氏体钢相变的影响[J].机械工程材料,2006,30(10):91-95. |
| |
| 作者姓名： | 杨涛 姚连登 李自刚 赵四新 金学军 |
| |
| 作者单位： | 1. 上海交通大学材料科学与工程学院,上海,200030
2. 宝钢股份有限公司技术中心,上海,201900 |
| |
| 摘 要： | 采用Thermeemastor Z热模拟机研究了低碳贝氏体钢奥氏体熟变形以及弛豫时间对低碳贝氏体相变的影响。结果表明：塑性变形抑制贝氏体相变，随着变形量增大，相变开始温度降低，初始转变速率加快，最终转变量减小；随着弛豫时间延长，相变开始温度和转变量逐渐升高并最终趋于稳定。弛豫一定时间使贝氏体板条束界面清晰，板条细化。
|
| 关 键 词： | 低碳贝氏体钢 热变形 弛豫 贝氏体相变 |
| 文章编号： | 1000-3738（2006）10-0091-05 |
| 收稿时间： | 2005-12-17 |
| 修稿时间： | 2005-12-172005-12-29 |
The Effect of Hot Deformation and Relaxation on the Transformation of Low Carbon Bainitic Steel |
| |
| YANG Tao,YAO Lian-deng,LI Zi-gang,ZHAO Si-xin,JIN Xue-jun.The Effect of Hot Deformation and Relaxation on the Transformation of Low Carbon Bainitic Steel[J].Materials For Mechanical Engineering,2006,30(10):91-95. |
| |
| Authors: | YANG Tao YAO Lian-deng LI Zi-gang ZHAO Si-xin JIN Xue-jun |
| |
| Affiliation: | 1. Shanghai Jiaotong University, Shanghai 200030, China; 2. Baosteel Technology Center, Shanghai 201900, China |
| |
| Abstract: | After hot deformation and relaxation of austenite, the kinetics, especially the mierostrueture evolvements of low carbon bainitic steel were studied with Thermecmastor Z simulator. With the increasing of strain, B, and the maximum bainitic volume fraction decreases, however, transformation rates at the initial stage are accelerated. With the increasing of the relaxation time after hot deformation, B, and the volume fractions of hainite transformation increase, and approach to a maximum value. The relaxation makes the boundaries of balnitic plates become clear and the individual plate becomes thinner. |
| |
| Keywords: | low carbon bainitic steel hot deformation relaxation bainitic transformation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
