Abstract: | An electrolytic solution surface was used to simulate the surface of wet polluted insulators. A local discharge propagates on the solution surface when an impulse voltage is applied to the surface. The intensity of photoemission from the tip of the local discharge, the propagation velocity of the local discharge, and the discharge current were measured simultaneously. It was found that the propagation velocity increases with the photoemission intensity and the resistivity of the solution, and the influence of the air pressure and the applied voltage waveform on the velocity is very small. Furthermore, it was deduced that the ratio of the current through the local discharge tip to the total discharge current is not influenced by the local discharge length and the applied voltage waveform |