| 潜水挂钩注射模设计 |
| |
| 引用本文： | 杜智敏.潜水挂钩注射模设计[J].模具工业,2003(6):49-51. |
| |
| 作者姓名： | 杜智敏 |
| |
| 作者单位： | 广东白云职业技术学院,广东,广州,510405 |
| |
| 摘 要： | 以潜水挂钩注射模的设计制造为例,介绍了透明塑件模具的哈夫抽芯、异形分型面及进料浇口和顶出机构的设计制造方法,实践证明 ,此模具工艺性好,生产的塑件质量较高
|
| 关 键 词： | 透明塑件 注射模 异形分型面 哈夫抽芯 |
| 文章编号： | 1001-2168(2003)06-0049-03 |
| 修稿时间： | 2002年11月6日 |
Design of Injection Mould for Diving Clevis |
| |
| DU Zhi_min.Design of Injection Mould for Diving Clevis[J].Die & Mould Industry,2003(6):49-51. |
| |
| Authors: | DU Zhi_min |
| |
| Abstract: | Based on the injection mould for diving clevis,the designand manufacturing technique for transparent produce was+stated,including the core_pulling by two half slides,irregular parting lines,the entry gate and the ejection mechanism.The mould was practically proved to be good at processing and could make quality plastic parts. |
| |
| Keywords: | transparent plastic part injection mould irregular parting lines core-pulling by two half slides |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
