| 基于精确传动比的多级平行轴齿轮减速器齿数设计 |
| |
| 引用本文： | 周立轩,袁和相,郑守帮,罗登峰,乔永钦. 基于精确传动比的多级平行轴齿轮减速器齿数设计[J]. 机械传动, 2021, 45(4): 152-155. DOI: 10.16578/j.issn.1004.2539.2021.04.024 |
| |
| 作者姓名： | 周立轩 袁和相 郑守帮 罗登峰 乔永钦 |
| |
| 作者单位： | 郑州机械研究所有限公司 通用传动二部,河南 郑州 450052 |
| |
| 摘 要： | 以精确保证多级平行轴齿轮减速器的总传动比为设计目标,研究了在给定中心距、总传动比条件下,齿轮各参数之间的数学关系;建立了多级减速器齿轮齿数选择的数学模型;开发了多级齿轮减速器的齿数计算程序,使设计者可以快速确定多级平行轴齿轮减速器各级齿轮的齿数组合,在合理的模数、螺旋角、变位系数取值范围内,保证各级中心距,并精确保证总...
|
| 关 键 词： | 精确传动比 多级齿轮减速器 齿轮齿数 |
Tooth Number Design of Multi-stage Parallel Shaft Gear Reducer based on Accurate Transmission Ratio |
| |
| Zhou Lixuan,Yuan Hexiang,Zheng shoubang,Luo Dengfeng,Qiao Yongqin. Tooth Number Design of Multi-stage Parallel Shaft Gear Reducer based on Accurate Transmission Ratio[J]. Journal of Mechanical Transmission, 2021, 45(4): 152-155. DOI: 10.16578/j.issn.1004.2539.2021.04.024 |
| |
| Authors: | Zhou Lixuan Yuan Hexiang Zheng shoubang Luo Dengfeng Qiao Yongqin |
| |
| Affiliation: | (Second Department of General Transmission,Zhengzhou Research Institute of Mechanical Engineering Co.,Ltd.,Zhengzhou 450052,China) |
| |
| Abstract: | With the design objective of accurately ensuring the total transmission ratio of the multi-stage parallel shaft gear reducer,the mathematical relations among the gear parameters are studied under the condi?tions of given center distance and total transmission ratio.The mathematical model of gear tooth number selec?tion of multi-stage reducer is established.The program for calculating the number of teeth of the multi-stage gear reducer is developed,which enables the designer to quickly determine the number of teeth of each gear of the multi-stage parallel shaft gear reducer,and ensure the center distance of each stage and the total transmis?sion ratio accurately within the reasonable value range of modulus,helix angle and modification coefficient. |
| |
| Keywords: | Accurate transmission ratio Multi-stage gear reducer Gear tooth number |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
