首页 | 本学科首页   官方微博 | 高级检索  
     

考虑时变摩擦系数的微线段齿轮系统动态特性分析
引用本文:熊杨寿,韩广志,黄康,赵韩. 考虑时变摩擦系数的微线段齿轮系统动态特性分析[J]. 机械工程学报, 2021, 57(19): 113-127. DOI: 10.3901/JME.2021.19.011
作者姓名:熊杨寿  韩广志  黄康  赵韩
作者单位:航空结构件成形工艺与装备安徽省重点实验室 合肥 230009;合肥工业大学机械工程学院 合肥 230009
基金项目:国家自然科学基金(51775156)、国家重点研发计划(2017YFB0103201)、安徽省自然科学基金(1908085QE228)、安徽省重点研究与开发计划(202004h07020013)和中央高校基本科研业务费专项项目(PA2020GDSK0091)资助项目。
摘    要:结合微线段齿轮的啮合特性,将其啮合过程离散化,建立了微线段齿轮6自由度啮合耦合动力学模型,模型中考虑了时变摩擦系数、时变的基圆和压力角等非线性因素.采用数值积分法研究对比了渐开线齿轮和微线段齿轮在不同工况下的动力学响应,结合频谱图和分岔图分析了参数对微线段齿轮横向振动的影响以及摩擦系数对系统稳定性的影响,并通过试验对比...

关 键 词:非线性动力学  微线段齿轮  时变摩擦系数  时变基圆  振动
收稿时间:2020-12-31

Research on the Nonlinear Dynamics of Micro-segment Gear System with Time-Varying Friction Coefficient
XIONG Yangshou,HAN Guangzhi,HUANG Kang,ZHAO Han. Research on the Nonlinear Dynamics of Micro-segment Gear System with Time-Varying Friction Coefficient[J]. Chinese Journal of Mechanical Engineering, 2021, 57(19): 113-127. DOI: 10.3901/JME.2021.19.011
Authors:XIONG Yangshou  HAN Guangzhi  HUANG Kang  ZHAO Han
Affiliation:1. Anhui Province Key Lab of Aerospace Structural Parts Forming Technology and Equipment, Hefei 230009;2. School of Mechanical Engineering, Hefei University of Technology, Hefei 230009
Abstract:A systematic dynamic analysis of a micro-segment gear system with time-varying friction coefficient, time-varying base circle, and time-varying stiffness is made. A six-degree-of freedom nonlinear dynamic model of a micro-segment gear is established by discretizing the meshing process. The numerical integration method is used to study the dynamic response of the micro-segment gear and involute gear under different operating conditions. The effects of different parameters on radial vibration are investigated from the amplitude–frequency response and bifurcation diagram. Through the experiment, the micro-segment gear and the involute gear are compared during the actual operation. The results reveal that compared with involute gear, micro-segment gear has smaller vibration and better system stability, especially in the case of medium-high speed and heavy load. The common amplitude value can be effectively reduced by increasing the support stiffness and the support damping, but the change in the support stiffness changes the position of the resonance region. The friction coefficient has little effect on the amplitude of the micro-segment gear, but increasing the friction coefficient causes the system to end the chaotic response ahead of time. The error and vibration of the micro-segment gearbox during actual operation are smaller and the performance is better.
Keywords:nonlinear dynamics  microsegment gear  time-varying friction coefficient  time-varying base circle  vibration  
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《机械工程学报》浏览原始摘要信息
点击此处可从《机械工程学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号