Performance of Frequency Division Multiplexing Readout System for AC-Biased Transition-Edge Sensor X-ray Microcalorimeters |
| |
Authors: | R Yamamoto K Sakai Y Takei N Y Yamasaki K Mitsuda |
| |
Affiliation: | 1. ISAS/JAXA, 3-1-1 Yoshinodai, Chuo, Sagamihara, Kanagawa, 252-5210, Japan
|
| |
Abstract: | Frequency division multiplexing (FDM) is a promising approach to read out a large format transition-edge sensor (TES) array for future astrophysical missions. We constructed a four channel FDM readout system using baseband feedback in the MHz band. We demonstrated the principle of our FDM method with an actual TES array, a multiplexing SQUID and LC band-pass filters under 100 mK. The resonant frequencies of LC filters were consistent with the design value with an accuracy of better than 3 %. We successfully obtained X-ray pulses from two TESs simultaneously but the energy resolution was degraded to about 100 eV at 5.9 keV and crosstalk effects were observed. The origin of the crosstalk effects is investigated by modified setups. Based on comparative experiments and numerical calculations, we conclude that the non-linearity of the SQUID is the cause of some of the crosstalk effects. Unlike the regular crosstalk effect from the adjoining channels, the crosstalk effect due to non-linearity observed in this paper occurs in all channels. Solving these problems will help us to obtain FDM readout with sufficient energy resolution. |
| |
Keywords: | |
本文献已被 SpringerLink 等数据库收录! |
|