| 新型引剑曲线的设计研究 |
| |
| 引用本文： | 郭宏亮,叶国铭. 新型引剑曲线的设计研究[J]. 丝绸, 2006, 0(1): 40-42 |
| |
| 作者姓名： | 郭宏亮 叶国铭 |
| |
| 作者单位： | 东华大学,机械工程学院,上海,200051;东华大学,机械工程学院,上海,200051 |
| |
| 摘 要： | 将引剑机构作为弹性构件考虑，建立了其动态模型，分析了其动态特性，指出了采取多项式运动规律的最低次数要求。进而提出了一种高次多项式引剑曲线，通过给定边界条件，利用待定系数法，求出了该曲线方程。分析表明，该曲线具有明显的优越性。
|
| 关 键 词： | 剑杆织机 引剑 动态模型 高次多项式运动曲线 |
| 文章编号： | 1001-7003（2006）01-0040-03 |
| 收稿时间： | 2004-09-17 |
| 修稿时间： | 2004-09-17 |
Design of New Curve for Rapier Driving |
| |
| GUO Hong-liang,YE Guo-ming. Design of New Curve for Rapier Driving[J]. Silk Monthly, 2006, 0(1): 40-42 |
| |
| Authors: | GUO Hong-liang YE Guo-ming |
| |
| Affiliation: | College of Mechanical Engineering , Donghua University, Shanghai, 200051,China |
| |
| Abstract: | considered as an elastic component, dynamic model of the rapier was founded, dynamic characteristics was analyzed, and the lowest order request was pointed out when adopting polynomial movement discipline. A high order polynomial motion rule was also put forward. Given border conditions, the rule was found out by means of pending coefficient. Analysis shows that the rule is obviously advantageous. |
| |
| Keywords: | Rapier loom Rapier driving Dynamic model High order polynomial motion rule |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
