| 棒材对齐辊道及移钢系统的技术改造 |
| |
| 引用本文： | 连金花,何勇,王光胜.棒材对齐辊道及移钢系统的技术改造[J].包钢科技,2005,31(1):38-40. |
| |
| 作者姓名： | 连金花 何勇 王光胜 |
| |
| 作者单位： | 包钢(集团)公司设计院,内蒙古,包头,014010;包钢钢联股份棒材厂,内蒙古,包头,014010 |
| |
| 摘 要： | 针对棒材精整对齐量不足,切头去尾浪费大,弯钢现象严重的难题,采用将对齐辊道由原来的柱形辊改为槽形辊,三组移钢传动机构用同步轴相连,连锁控制的方式,对棒材冷床进行改造.改造后棒材定尺率、成材率明显提高,经济效益显著.
|
| 关 键 词： | 对齐辊道 槽形辊 移钢 连锁控制 定尺率 |
| 文章编号： | 1009-5438(2005)01-0038-03 |
Technical modification of justification roller and moving system of steel bars |
| |
| LIAN Jin-hua,HE yong,WANG Guang-sheng.Technical modification of justification roller and moving system of steel bars[J].Science & Technology of Baotou Steel(Group) Corporation,2005,31(1):38-40. |
| |
| Authors: | LIAN Jin-hua HE yong WANG Guang-sheng |
| |
| Abstract: | Because of poor precision of aligning of the justification rollers, there was a waste due to the cut ends of the bars and an occurrence of bend bars. Through changing the justification rollers from column-shape roller into chamfer-shape roller, connecting the three group gearing bars moving mechanics with a synchronous axle and adopting a method of chain control, the bars cooling bed is modified, having gained a good yield of the steel bars. |
| |
| Keywords: | justification roller chamfer roller steel moving chain control percentage of the same measure |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
