首页 | 本学科首页   官方微博 | 高级检索  
     

喷嘴喷雾压力与雾化粒度关系的实验研究
引用本文:程卫民,周刚,左前明,聂文,王刚. 喷嘴喷雾压力与雾化粒度关系的实验研究[J]. 煤炭学报, 2010, 35(8): 1308-1313
作者姓名:程卫民  周刚  左前明  聂文  王刚
作者单位:山东科技大学 矿山灾害预防控制教育部重点实验室,山东 青岛,266510
基金项目:教育部新世纪优秀人才支持计划资助项目(NCET-06-0606);长江学者和创新团队发展计划资助项目(IRT0843);山东省采矿工程“泰山学者”资助项目
摘    要:对喷嘴雾化粒度的指标和雾化粒度的测定方法进行了分析,利用Winner313激光粒度分析仪设计了喷嘴雾化实验系统,对煤矿采煤工作面常用的5种喷嘴进行了5个压力下的雾化粒度测定,得到了各类喷嘴在不同压力下的D50、D90、D[3,2]等数据,根据数据分析得出:要对呼吸性粉尘有较好的捕集作用,就必须实现高压喷雾;8 MPa作为支架和煤机喷雾压力时的雾化粒度对采煤工作面降尘效果最佳。通过在综放工作面的实际应用,降尘率平均在90%以上。

关 键 词:喷嘴;喷雾压力;雾化粒度  
收稿时间:2010-03-08
修稿时间:2010-04-29

Experimental research on the relationship between nozzle spray pressure and atomization particle size
Abstract:Analyzed the index of atomization particle size of spraying nozzle and the test method of aerosol particle size.Utilizing Winner313 Laser Particle Size,designed the experimental system,and then tested the atomization particle size of five kinds conventional spraying nozzles in coal mine,under 2,4,6,8,10 MPa.Got data of D50,D90,D[3,2] of various types of nozzles under different pressures,and based on these data,it is found that we should realize high pressure spray for better capture of respirable dust.Atomization particle size under 8 MPa between support and coal cutter can realize the best performance of dust falling.Through on site applications,the efficiency of the dust falling is achieved over 90%.
Keywords:nozzle  nozzle spray pressure  atomization particle size
点击此处可从《煤炭学报》浏览原始摘要信息
点击此处可从《煤炭学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号