Synergistic Effects between Anionic and Sulfobetaine Surfactants for Stabilization of Foams Tolerant to Crude Oil in Foam Flooding

In foam flooding, foams stabilized by conventional surfactants are usually unstable in contacting with crude oil, which behaves as a strong defoaming agent. In this article, synergistic effects between different surfactants were utilized to improve foam stability against crude oil. Targeted to reservoir conditions of Daqing crude oil field, China (45 °C, salinity of 6778 mg L^?1, pH = 8–9), foams stabilized by typical anionic surfactants fatty alcohol polyoxyethylene ether sulfate (AES) and sodium dodecyl sulfate (SDS) show low composite foam index (200–500 L s) and low oil tolerance index (0.1–0.2). However, the foam stability can be significantly improved by mixing the anionic surfactant with a sulfobetaine surfactant, which behaves as a foam stabilizer increasing the half-life of foams, and those with longer alkyl chain behave better. As an example, by mixing AES and SDS with hexadecyl dimethyl hydroxypropyl sulfobetaine (C₁₆HSB) at a molar fraction of 0.2 (referring to total surfactant, not including water), the maximum composite foaming index and oil tolerance index can be increased to 3000/5000 L s and 1.0/4.0, respectively, at a total concentration between 3 and 5 mM. The attractive interaction between the different surfactants in a mixed monolayer as reflected by the negative β^s parameter is responsible for the enhancement of the foam stabilization, which resulted in lower interfacial tensions and therefore negative enter (E), spreading (S), and bridging (B) coefficients of the oil. The oil is then emulsified as tiny droplets dispersed in lamellae, giving very stable pseudoemulsion films inhibiting rupture of the bubble films. This made it possible to utilize typical conventional anionic surfactants as foaming agents in foam flooding.