| 脉冲进气精炼铝合金熔体的水力模拟研究 |
| |
| 引用本文： | 蒋海燕,孙宝德,倪红军,丁文江. 脉冲进气精炼铝合金熔体的水力模拟研究[J]. 铸造, 2001, 50(8): 470-472 |
| |
| 作者姓名： | 蒋海燕 孙宝德 倪红军 丁文江 |
| |
| 作者单位： | 1. 上海交通大学材料科学与工程学院,;哈尔滨工业大学材料科学与工程学院,
2. 上海交通大学材料科学与工程学院, |
| |
| 基金项目： | 国家重点研究开发规划(973)项目(G1999064900)，中国博士后科学基金，上海市博士后基金。 |
| |
| 摘 要： | 本文将带气体动力脉冲器的转头应用于铝合金熔体净化旋转喷吹技术当中，并通过水力模拟实验，研究了脉冲进气方式对气泡大小的影响。结果表明：带气体动力脉冲器的转头可以产生强烈的脉冲射流，在相同的气体流量和转头转速等条件下，脉冲射流比连续射流更容易得到小尺寸气泡，更有利于氢的排除。
|
| 关 键 词： | 脉冲气流 旋转喷吹 铝合金 水力模拟 除气 精炼 熔体净化 |
| 文章编号： | 1001-4977（2001）08-0470-03 |
| 修稿时间： | 2001-05-28 |
Study on Aluminum Alloy Melt Degassing with Pulse GasCurrent by Water Simulated Test |
| |
| JIANG Hai-yan ,,SUN Bao-de ,NI Hong-jun ,DING Wen-jiang. Study on Aluminum Alloy Melt Degassing with Pulse GasCurrent by Water Simulated Test[J]. Foundry, 2001, 50(8): 470-472 |
| |
| Authors: | JIANG Hai-yan SUN Bao-de NI Hong-jun DING Wen-jiang |
| |
| Affiliation: | JIANG Hai-yan 1,2,SUN Bao-de 1,NI Hong-jun 1,DING Wen-jiang 1 |
| |
| Abstract: | In this paper, a new kind of rotating impeller which could produce pulse gas current has been used in the technology of rotating impeller degassing of aluminum alloy melt, and the effect of pulse gas current on the gas bubble size has been studied with the simulated test in water. The results show that violent pulse gas current could be generated by using this kind of impeller, and compared with the constant current, the pulse gas current is advantageous to decreasing the gas bubble size, so that the degassing result is improved. |
| |
| Keywords: | pulse gas current rotating impeller blowing aluminum alloy degassing water simulation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
