| 动模倒装加热式热流道注射模设计 |
| |
| 引用本文： | 周旭红.动模倒装加热式热流道注射模设计[J].模具技术,2006(2):14-15,47. |
| |
| 作者姓名： | 周旭红 |
| |
| 作者单位： | 湖南生物机电职业技术学院,机械及自动化系,湖南,长沙,410126 |
| |
| 摘 要： | 通过对某种电脑机箱上的塑料件的工艺分析，介绍了一种动模倒装加热式热流道注射模的模具结构，对塑件外观面有较高要求、需从塑件内表面进胶的注射模具的设计有一定的参考价值。
|
| 关 键 词： | 动模倒装 加热式热流道 工艺分析 模具结构 |
| 文章编号： | 1001-4934（2006）02-0014-02 |
| 收稿时间： | 2005-12-23 |
| 修稿时间： | 2005-12-23 |
Design of Injection Mold with inverse-installed Moving Plate and Heating Hot-runner |
| |
| ZHOU Xu-hong.Design of Injection Mold with inverse-installed Moving Plate and Heating Hot-runner[J].Die and Mould Technology,2006(2):14-15,47. |
| |
| Authors: | ZHOU Xu-hong |
| |
| Affiliation: | ZHOU Xu-hong |
| |
| Abstract: | Through the processing analysis of plastic parts of a computer cover, the mold structure of an injection mold with inverse-installed moving plate and heating hot runner is introduced. It has certain reference to the design with higher appearance requirement or feeding from inner surface of a product. |
| |
| Keywords: | inverse-installed moving plate heating hot runner processing analysis mold structure |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
