| 空调挂机上壳体注射模设计 |
| |
| 引用本文： | 张德标. 空调挂机上壳体注射模设计[J]. 模具工业, 2001, 1(10): 32-33 |
| |
| 作者姓名： | 张德标 |
| |
| 作者单位： | 宁波跃飞模具有限公司 |
| |
| 摘 要： | 介绍了上壳体注射模的结构 ,重点介绍了模具侧抽芯、型芯斜顶块设计及进料浇口和顶出机构的改进
|
| 关 键 词： | 上壳体 注射模 侧抽芯 顶块 浇口 |
| 修稿时间： | 2001-04-28 |
Design of the Injection Mould for the Upper Shell Body of the Hanging Part of the Air-Conditioner |
| |
| Zhang Debiao. Design of the Injection Mould for the Upper Shell Body of the Hanging Part of the Air-Conditioner[J]. Die & Mould Industry, 2001, 1(10): 32-33 |
| |
| Authors: | Zhang Debiao |
| |
| Affiliation: | Zhang Debiao |
| |
| Abstract: | The structure of the injection mould for the upper shell body was introduced. The design of the side core_pulling system and the slanted kicking block of the core and the improvement of the feeding gate and kicking system were mainly discussed. |
| |
| Keywords: | upper shell body injection mould side core_pulling kicking block gate |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
