| 金属基陶瓷涂层/钢基体界面裂纹的应力强度因子 |
| |
| 引用本文： | 徐连勇,荆洪阳. 金属基陶瓷涂层/钢基体界面裂纹的应力强度因子[J]. 焊接学报, 2008, 29(3): 84-88 |
| |
| 作者姓名： | 徐连勇 荆洪阳 |
| |
| 作者单位： | 天津大学,材料科学与工程学院,天津,300072;天津市现代连接技术重点实验室,天津,300072;天津大学,材料科学与工程学院,天津,300072;天津市现代连接技术重点实验室,天津,300072 |
| |
| 基金项目： | 国家自然科学基金 , 高等学校博士学科点专项科研项目 |
| |
| 摘 要： | 将三点弯曲断裂力学试验与有限元分析(FEA)结合起来计算LX88A涂层与Q345钢界面裂纹的复应力强度因子.结果表明,对于三点弯曲试样,当发生界面断裂的临界载荷较小时,涂层试样的界面裂纹尖端附近存在K控制区,但K因子随临界载荷的增大,K因子控制区消失,发生失效的现象.对于三点弯曲试样,当临界载荷超过一定值时,线弹性断裂力学已经不能描述界面裂纹尖端场.因此,在后续研究中有必要使用弹塑性断裂力学和概率断裂力学对此类界面裂纹进行分析.
|
| 关 键 词： | 界面裂纹 复应力强度因子 三点弯曲试验 有限元分析 |
| 文章编号： | 0253-360X（2008）03-0084-05 |
| 收稿时间： | 2007-11-10 |
| 修稿时间： | 2007-11-10 |
Stress intensity factor of interfacial crack between metal-base ceramic coating and steel |
| |
| XU Lianyong and JING Hongyang. Stress intensity factor of interfacial crack between metal-base ceramic coating and steel[J]. Transactions of The China Welding Institution, 2008, 29(3): 84-88 |
| |
| Authors: | XU Lianyong and JING Hongyang |
| |
| Affiliation: | School of Materials Science and Engineering, Tianjin University, Tianjin 300072, China and School of Materials Science and Engineering, Tianjin University, Tianjin 300072, China |
| |
| Abstract: | The three-point bending fracture mechanics experiments and finite element analysis had been used to compute the complex stress intensity factor (K)of the interfacial crack between LX88A coating and Q345 steel.It was found that the K-dominant zone exist near the crack tip only for some specimens.The result indicates that KC can not be used as the single fracture parameter to evaluate the interface fracture behavior for three-point bending specimen. Therefore, it is necessary that the elastic-plastic fracture mechanics and probabilistic fracture mechanics are used to analyze such interface cracks. |
| |
| Keywords: | interfacial crack complex stress intensity factor 3-point bend test finite element analysis |
| 本文献已被 维普 万方数据 等数据库收录！ |
| 点击此处可从《焊接学报》浏览原始摘要信息 |
|
点击此处可从《焊接学报》下载免费的PDF全文 |
|
