| 小孔超声加工参数的研究 |
| |
| 引用本文： | 窦振荣,孙立新.小孔超声加工参数的研究[J].河北工业大学学报,1990(1). |
| |
| 作者姓名： | 窦振荣 孙立新 |
| |
| 作者单位： | 河北工学院机械一系，河北工学院机械一系 |
| |
| 摘 要： | 本文用超声加工的方法分别在玻璃、陶瓷、玛瑙和某些玉石上做了小孔加工方面的探讨,对影响生产率的一些因素进行了研究,结果表明,在玛瑙上用超声打孔要比用机械研磨生产率提高近十倍.此外,本文还就加工过程中使用的工具——变幅杆的参数进行了一些探讨.
|
| 关 键 词： | 超声加工 玛瑙 打孔 |
The Study on the Parameters of the Ultrasonic Machining for Little Hole |
| |
| Dou Zhengrong Sun Lixin.The Study on the Parameters of the Ultrasonic Machining for Little Hole[J].Journal of Hebei University of Technology,1990(1). |
| |
| Authors: | Dou Zhengrong Sun Lixin |
| |
| Affiliation: | Dou Zhengrong Sun Lixin |
| |
| Abstract: | In this paper,some research works of the ultrasonic machining of little hole on the materials of glass,ceramics,agate and some kinds of jade were presented. Arid the study of the machining parameters which influence productivity are given here.The productivity of the ultrasonic machining is ten times higher than that of the traditional one,during the machining of agate.Besides all above,some other parameters of the tool used in the ultrasonic machining system have been also tested. |
| |
| Keywords: | Ultrasonic machining Agate Hole making |
| 本文献已被 CNKI 等数据库收录！ |
|
