| 平面运动从动件等径凸轮机构运动角的确定 |
| |
| 引用本文： | 钱志良.平面运动从动件等径凸轮机构运动角的确定[J].机械设计,2006,23(1):50-52. |
| |
| 作者姓名： | 钱志良 |
| |
| 作者单位： | 苏州大学,机电工程学院,江苏,苏州,215021 |
| |
| 摘 要： | 针对平面运动从动件等径凸轮机构，根据机构存在有意义解和保证输出摆杆传动角两个条件，分析并确定了凸轮运动角、输出摆杆摆角及其初始安装角的取值范围，进而绘制了凸轮运动角与摆杆摆角的可选值城图，为谈机构的设计与使用提供了方便。
|
| 关 键 词： | 等径凸轮 平面运动从动件 凸轮运动角 摆杆摆角 许用传动角 |
| 文章编号： | 1001-2354（2006）01-0050-03 |
| 收稿时间： | 2005-02-24 |
| 修稿时间： | 2005-02-242005-06-29 |
Determination of movement angle for equal-diameter cam mechanism with follower of planar movement |
| |
| QIAN Zhi-liang.Determination of movement angle for equal-diameter cam mechanism with follower of planar movement[J].Journal of Machine Design,2006,23(1):50-52. |
| |
| Authors: | QIAN Zhi-liang |
| |
| Affiliation: | School of Mechanical and Electrical Engineering, Suzhou University, Suzhou 215021, China |
| |
| Abstract: | Aimed at the equal-diameter cam mechanism with follower of planar movement, and according to two conditions of existing meaningful solution of the mechanism and of ensuring transmission angle of output swinging rod, the value selection ranges of cam motion angle, of swinging angle of output swinging rod and of its primary installation angle were analyzed and determined, and then proceed to plot the region graph of selectable value for motion angle of cam and swinging angle of swinging rod, thus provided convenience for the design and employment of that mechanism. |
| |
| Keywords: | equal-diameter cam follower with planar motion motion angle of cam swinging angle of swinging rod allowable transmission angle |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
