首页 | 本学科首页   官方微博 | 高级检索  
     

硅藻土多孔基板的制备与优化
引用本文:卢瑞,朱丽佳,郦瀚森,沈岩柏. 硅藻土多孔基板的制备与优化[J]. 矿产保护与利用, 2018, 0(4): 97-102. DOI: 10.13779/j.cnki.issn1001-0076.2018.03.041
作者姓名:卢瑞  朱丽佳  郦瀚森  沈岩柏
作者单位:东北大学 资源与土木工程学院,辽宁 沈阳 110819
基金项目:国家自然科学基金项目51674067国家自然科学基金项目51422402中央高校基本科研业务费项目N150101001中央高校基本科研业务费项目N160106004
摘    要:以天然矿物材料硅藻土为基体、球型石墨为造孔剂、聚四氟乙烯为粘结剂,采用搅拌混料、等静压成型及高温烧结工艺,制备出新型硅藻土多孔基板。通过扫描电子显微镜、X射线衍射仪、阿基米德排水法、三点抗弯强度测试,分析了造孔剂添加量、成型压强、烧结温度对基板的微观形貌、物相组成、显气孔率及抗弯强度的影响。结果表明,在造孔剂添加量为40%、成型压强为160 MPa、烧结温度为1 000℃时,可以获得显气孔率为50.1%、体积密度为0.97 g·cm-3、抗弯强度为4.43 MPa、孔道尺寸相对均匀的硅藻土多孔基板,孔径分布约在20 μm左右。该研究拓宽了矿物材料的开发和应用领域。 

关 键 词:硅藻土   多孔基板   优化制备   结构特性   球型石墨
收稿时间:2018-05-08

Preparation and Optimization of Diatomite-based Porous Substrates
Affiliation:School of Resources and Civil Engineering, Northeastern University, Shenyang 110819, China
Abstract:The novel diatomite-based porous substrates were prepared via the combined processes including stirring mixing, isostatic pressing and sintering with the diatomite as the source material, carbon powder as the pore-forming material, and PTFE as the binder. The effects of pore-forming agent content, molding pressure and sintering temperature on the microstructure, phase composition, open porosity and bending strength of the substrates were investigated by the scanning electron microscope, X-ray diffractometer, Archimedes method and Three-point bending strength tests. The results indicated that the diatomite-based porous substrates with open porosity of 50.1%, apparent density of 0.97 g·cm-3, bending strength of 4.43 MPa and relatively uniform pore size of 20 μm were obtained at the optimal preparation conditions of carbon content of 40%, forming pressure of 160 MPa and the sintering temperature of 1 000℃. The results expand the new application field for the development and utilization of mineral materials. 
Keywords:
本文献已被 CNKI 等数据库收录!
点击此处可从《矿产保护与利用》浏览原始摘要信息
点击此处可从《矿产保护与利用》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号