首页 | 本学科首页   官方微博 | 高级检索  
     

再入式集成光学陀螺原理研究
引用本文:高峰,赵林,田伟,胡朝阳,潘珍吾,汤全安,章燕申. 再入式集成光学陀螺原理研究[J]. 红外与激光工程, 2001, 30(3): 198-201
作者姓名:高峰  赵林  田伟  胡朝阳  潘珍吾  汤全安  章燕申
作者单位:清华大学精密仪器系,
基金项目:“九五”国防预研项目 (8.7.1 .7)
摘    要:就再入式集成光学陀螺(IOG)的原理进行了理论分析,通过对敏感环长度为20m的集成光学陀螺光纤仿真系统的开环输出信号的分析,验证了输出信号中再入分量的存在,从而在实验上验证了再入的原理。为了从陀螺输出信号中提取高阶的再入信号,提出了一种占空比不为0.5的方波调制方案,使得在采样时间间隔τ内,只有对应阶次的再入信号被偏置在灵敏度最大的位置。这种方案有望给有源和无源再入式集成光学陀螺的信号读出提供一种有效的解决方法。

关 键 词:集成光学陀螺 再入 方波调制
文章编号:1007-2276(2001)03-0198-04
修稿时间:2000-11-04

Investigation on the principle of re entrant IOG
GAO Feng,ZHAO Lin,TIAN Wei,HU Zhao-yang,PAN Zhen-wuTANG Quan-an,ZHANG Yan-shen. Investigation on the principle of re entrant IOG[J]. Infrared and Laser Engineering, 2001, 30(3): 198-201
Authors:GAO Feng  ZHAO Lin  TIAN Wei  HU Zhao-yang  PAN Zhen-wuTANG Quan-an  ZHANG Yan-shen
Abstract:The theoretical analysis and experimental verification of the principle of re-entrant IOG were carried out here. The experimental setup for analog simulation was established with Sagnac Sensing Ring (SSR) length of 20m. Based on the analysis of open loop output signal of the system, the signal of re-entrant part was verified. In order to get the high order re-entrant signal, a new modulation method using square waveform which duty ratio is not equal to 0.5 was suggested, in which the corressponding order of re-entrant signal was biased at maximum sensitivity. It provides a way to solve the problems in signal readout from ARE-IOG and PRE-IOG.
Keywords:Integrated optic gyroscope  Re-entrant  Square-waveform modulation  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号