| 基于有限元法的滚动轴承接触问题研究 |
| |
| 引用本文： | 陈喆,王伟,张仲焘. 基于有限元法的滚动轴承接触问题研究[J]. 机械, 2011, 38(4): 17-20,49 |
| |
| 作者姓名： | 陈喆 王伟 张仲焘 |
| |
| 作者单位： | 1. 中船重工集团公司,七二二研究所,湖北,武汉,430079
2. 武汉理工大学,机电工程学院,湖北,武汉,430070 |
| |
| 摘 要： | 依据某汽车专用轴承厂提供的设计图纸利用SolidWorks三维设计软件对轴承代号为30615的汽车专用轴承建立三维几何模型,然后将其导入到SolidWorks设计软件的Simulation仿真模块中,根据轴承实际工作情况对模型添加约束、施加载荷、接触设置等前处理,通过求解计算获得该滚动轴承的接触应力和变形结果云图,可直...
|
| 关 键 词： | Simulation 有限元分析 前处理 接触应力 变形 |
Research on FEA based contact analysis of rolling bearing |
| |
| CHEN Zhe,WANG Wei,ZHANG Zhong-tao. Research on FEA based contact analysis of rolling bearing[J]. Machinery, 2011, 38(4): 17-20,49 |
| |
| Authors: | CHEN Zhe WANG Wei ZHANG Zhong-tao |
| |
| Affiliation: | CHEN Zhe1,WANG Wei2,ZHANG Zhong-tao2(1.The No.722 Research Institute,China Shipbuilding Industry Corporation,Wuhan 430079,China,2.School of Mechanical & Electrical Engineering,Wuhan University of Technology,Wuhan 430070,China) |
| |
| Abstract: | Based on design drawings provided by a special car bearing factory,we establish three-dimensional geometrical model of special car bearing code-named 30615 in the application of 3D design software SolidWorks,then put it into the Simulation module of SolidWorks,according to the actual work of the bearing model,we add restrictions,applied load,contact setting and do other pretreatment,acquiring contact stress and deformation results cloud charts of rolling bearing by calculation,we can also intuitively check ... |
| |
| Keywords: | simulation finite-element analysis pretreatment contact stress deformation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
