| 基于虚拟样机和有限元技术的举升机构的设计 |
| |
| 引用本文： | 周陈霞,曹芳芳. 基于虚拟样机和有限元技术的举升机构的设计[J]. 机械, 2011, 38(5): 26-29 |
| |
| 作者姓名： | 周陈霞 曹芳芳 |
| |
| 作者单位： | 南京理工大学机械工程学院,江苏南京,210094 |
| |
| 摘 要： | 以某沥青混合搅拌机设备的设计研发为背景,为了研究该搅拌机的举升机构的设计是否合理,所期望的运动是否可实现以及关重件是否在力学性能上满足要求,通过在ADAMS中建立沥青混合料搅拌设备举升机构的仿真模型,运用虚拟样机技术对其位置布置进行设计,并对其进行运动仿真以及对举升机构的零件三角板进行受力分析,结合有限元软件,对三角板...
|
| 关 键 词： | 举升机构 虚拟样机 有限元 |
The design of lifting mechanism based on virtual prototype technology and finite element method |
| |
| ZHOU Chen-xia,CAO Fang-fang. The design of lifting mechanism based on virtual prototype technology and finite element method[J]. Machinery, 2011, 38(5): 26-29 |
| |
| Authors: | ZHOU Chen-xia CAO Fang-fang |
| |
| Affiliation: | ZHOU Chen-xia,CAO Fang-fang(School of Mechanical Engineering,Nanjing University of Science and Technology,Nanjing 210094,China) |
| |
| Abstract: | This paper takes the design of an asphalt mixing equipment for the background,in order to study the reasonability of the lifting mechanism part of the mixer and find whether the equipment can do the desired movement and the vital part can meet the requirements on the mechanical properties.The simulation model of lifting mechanism of asphalt mixing equipment was established and the layout of it was accomplished by using virtual prototype technology.The simulation and force analysis of set square was done,the... |
| |
| Keywords: | lifting mechanism virtual prototype finite element |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
