| 带孔洞立体截交线和相贯线的“分部作图法” |
| |
| 引用本文： | 张丙强. 带孔洞立体截交线和相贯线的“分部作图法”[J]. 福建建筑高等专科学校学报, 2011, 0(1): 11-14 |
| |
| 作者姓名： | 张丙强 |
| |
| 作者单位： | 福建工程学院土木工程系,福建福州350108 |
| |
| 摘 要： | 受组合体读图的形体分析法启发,提出求解带孔洞立体截交线和相贯线的分部作图法,将带孔洞立体分为外部形体和内部孔洞两部分,分别求出其截交线或者相贯线,然后再对外部形体和内部孔洞的轮廓线进行整理,并结合4个例子详细介绍了作图过程。
|
| 关 键 词： | 分部作图法 孔洞 截交线 相贯线 |
Sectional drawing method for sectioning lines and intersections of hollowed solids |
| |
| Zhang Bingqiang. Sectional drawing method for sectioning lines and intersections of hollowed solids[J]. Journal of Fujian College of Architecture & C.E., 2011, 0(1): 11-14 |
| |
| Authors: | Zhang Bingqiang |
| |
| Affiliation: | Zhang Bingqiang (Civil Engineering Department,Fujian University of Technology,Fuzhou 350108,China) |
| |
| Abstract: | Sectional drawing methods for lines of section and intersection of solids with hollows were presented.The hollowed solids were sectioned into exterior features and interior holes.The section-ing lines and intersections of the two components were solved.The outlines of the exterior features and interior holes were reorganized.The drawing process was elaborated with four examples. |
| |
| Keywords: | sectional drawing method solid with hollows sectioning line intersection |
| 本文献已被 维普 等数据库收录！ |
|
