| 五轴数控卷簧机控制系统 |
| |
| 引用本文： | 葛惠民,张耀,黄文广,程文锋. 五轴数控卷簧机控制系统[J]. 轻工机械, 2011, 29(6): 59-62. DOI: 10.3969/j.issn.1005-2895.2011.06.016 |
| |
| 作者姓名： | 葛惠民 张耀 黄文广 程文锋 |
| |
| 作者单位： | 浙江机电职业技术学院电气电子工程分院,浙江杭州,310053 |
| |
| 基金项目： | 浙江省科技厅重大专项(2008C11G6050001) |
| |
| 摘 要： | 提出了一种5轴数控卷簧机控制系统的设计方案。以ACS—SAR-LT-8运动控制器和平板工业计算机作为整个控制系统的核心部分,5个交流伺服轴分别实现卷簧机的变径、变节距、送丝、上切刀与下切刀的控制。运动控制器通过以太网接口与平板工业计算机通信。通过ETHECATNET与交流伺服驱动器通信。集弹簧CAD／CAM设计与加工于一体的系统软件设计,方便了用户的使用。实际应用表明,该设计方案简化了机械设计,增强了卷簧机的功能,提高了机床的使用寿命。图5参11
|
| 关 键 词： | 弹簧 数控卷簧机 运动控制器 多轴控制 |
Design of a Control System for 5-Axis Numeric Control Roll-Spring Machine |
| |
| GE Hui-min,ZHANG Yao,HUANG Wen-guang,CHEN Wen-feng. Design of a Control System for 5-Axis Numeric Control Roll-Spring Machine[J]. Light Industry Machinery, 2011, 29(6): 59-62. DOI: 10.3969/j.issn.1005-2895.2011.06.016 |
| |
| Authors: | GE Hui-min ZHANG Yao HUANG Wen-guang CHEN Wen-feng |
| |
| Affiliation: | GE Hui-min,ZHANG Yao,HUANG Wen-guang,CHEN Wen-feng(College of Electrical and Electronic Engineering,Zhejiang Institute of Mechanical & Electrical Engineering,Hangzhou 310053,China) |
| |
| Abstract: | Proposed a system design scheme for a five-axis NC roll-spring machine.With a ACS-SAR-LT-8 motion controller and a panel industrial computer as the core part of the whole control system,five ac servo shafts realized respectively some functions: changing the diameter,changing the pitch,sending wire,and the control of up-cutter and down-cutter.The motion controller communicated with the panel industrial computer via the Ethernet,with ac servo drive via as the ETHECATNET bus.The system software design integrat... |
| |
| Keywords: | spring numeric control roll-spring machine motion controller multi-axis control |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
