| 光固化非金属线锯丝膜基附着力测试方法 |
| |
| 引用本文： | 刘福庆,王海根. 光固化非金属线锯丝膜基附着力测试方法[J]. 轻工机械, 2011, 0(5): 87-89 |
| |
| 作者姓名： | 刘福庆 王海根 |
| |
| 作者单位： | 浙江工业大学之江学院机电工程分院; |
| |
| 基金项目： | 浙江省教育厅科研项目(Y200907922) |
| |
| 摘 要： | 光固化树脂层与芯线基体之间的结合性能是评价光固化非金属线锯丝质量的重要指标之一，直接影响线锯丝的使用寿命。介绍了一种基于拉拔法的树脂层与芯线基体之间膜基附着力测试方法，该方法不仅可以定量反映界面结合强度性能，而且试样制作简单、测试结果重复性好、实验数据可靠，可以用作光固化非金属线锯丝常规结合性能测试方法。图6表1参9
|
| 关 键 词： | 线锯 附着力 拉拔法 界面 |
Test Method of Adhesion Strength between Coating and Substrate for Ultraviolet-Curing Non-Metal Wire Saw |
| |
| LIU Fu-qing,WANG Hai-gen. Test Method of Adhesion Strength between Coating and Substrate for Ultraviolet-Curing Non-Metal Wire Saw[J]. Light Industry Machinery, 2011, 0(5): 87-89 |
| |
| Authors: | LIU Fu-qing WANG Hai-gen |
| |
| Affiliation: | LIU Fu-qing,WANG Hai-gen(College of Electrical and Mechanical Engineering,Zhijiang College of Zhejiang University of Technology,Hangzhou 310024,China) |
| |
| Abstract: | The bond performance between ultraviolet-curing resin coating and core wire substrate is one of the substantial evaluation indexes of ultraviolet-curing non-metal wire saw,which is directly affecting its service life span.In this paper,a test method of adhesion strength between resin coating and core wire substrate based on pull-out method is described.The method not only can quantify the performance of interface combined strength but also can be used as normal combined performance test method for ultraviol... |
| |
| Keywords: | wire saw adhesion strength pull-out method interface |
| 本文献已被 CNKI 维普 等数据库收录！ |
