| PE100级管材专用树脂性能研究 |
| |
| 引用本文： | 王浩水,王文清. PE100级管材专用树脂性能研究[J]. 合成树脂及塑料, 2006, 23(4): 24-26 |
| |
| 作者姓名： | 王浩水 王文清 |
| |
| 作者单位： | 中国石油化工股份有限公司齐鲁分公司,山东,淄博,255400;中国石油化工股份有限公司齐鲁分公司,山东,淄博,255400 |
| |
| 摘 要： | 分析了高密度聚乙烯(HDPE)管材专用树脂DGDB 2480H及典型双峰PE 100级管材专用树脂的性能。两者的力学性能相当;DGDB 2480H具有较低的剪切黏度,有利于管材的加工成型,熔体强度为1.05 MPa,与国产及进口管材专用树脂相当,比普通HDPE大,有利于大口径管材的挤出。
|
| 关 键 词： | 高密度聚乙烯 管材专用树脂 双峰分布 流变性能 熔体强度 |
| 文章编号： | 1002-1396(2006)04-0024-03 |
| 收稿时间： | 2006-03-29 |
| 修稿时间： | 2006-05-11 |
Study on properties of tubing speciality PE resin |
| |
| Wang Haoshui,Wang Wenqing. Study on properties of tubing speciality PE resin[J]. China Synthetic Resin and Plastics, 2006, 23(4): 24-26 |
| |
| Authors: | Wang Haoshui Wang Wenqing |
| |
| Affiliation: | Qilu Petrochemical Co., Ltd., SINOPEC, Shandong Zibo, 255400 |
| |
| Abstract: | The properties of high density polyethylene DGDB 2480H and the typical bimodal PE 100 were analyzed and contrasted in this paper.As a kind of tubing speciality resins,DGDB 2480H possessed mechanical properties equivalent to those of PE 100.Compared with its reference resin,DGDB 2480H had a lower shear viscosity that benefited its processing and moulding.The melt strength of DGDB 2480H reached 1.05 MPa,which was equivalent to domestic and overseas counterparts but higher than general HDPE,and was highly advantageous to extrusion of pipes with large caliber. |
| |
| Keywords: | high density polyethylene tubing speciality resin bimodal distribution rheologicalbehaviour melt strength |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
