| 基于密度法的胶印质量参数控制方法研究 |
| |
| 引用本文： | 袁 尉,赵秀萍,蒋青言.基于密度法的胶印质量参数控制方法研究[J].包装工程,2011,32(9):81-84. |
| |
| 作者姓名： | 袁 尉 赵秀萍 蒋青言 |
| |
| 作者单位： | 天津科技大学,天津,300222;天津科技大学,天津,300222;天津科技大学,天津,300222 |
| |
| 摘 要： | 通过设定标准的出版条件和印刷条件,测量并分析了印刷样张的实地密度、网点扩大、相对反差等印刷质量控制参数,基于这些参数建立了CTP印版输出补偿曲线,确定了最佳的印刷参数,获得了理想的印刷效果。
|
| 关 键 词： | 实地密度 网点扩大 相对反差 叠印率 印刷质量 |
| 收稿时间： | 3/8/2011 12:00:00 AM |
| 修稿时间： | 2011/5/10 0:00:00 |
Study of Offset Printing Parameter Control Method Based on Densimetry |
| |
| YUAN Wei,ZHAO Xiu-ping and JIANG Qing-yan.Study of Offset Printing Parameter Control Method Based on Densimetry[J].Packaging Engineering,2011,32(9):81-84. |
| |
| Authors: | YUAN Wei ZHAO Xiu-ping and JIANG Qing-yan |
| |
| Affiliation: | YUAN Wei,ZHAO Xiu-ping,JIANG Qing-yan(Tianjin University of Science and Technology,Tianjin 300222,China) |
| |
| Abstract: | By setting the standard of printing and platemaking conditions,the printing quality control parameters of printing sample such as solid density,dot gain and relative contrast were measured and analyzed.The CTP compensation curves were plotted based on these parameters.The optimal printing parameters were determined and the ideal printing effect was obtained. |
| |
| Keywords: | solid density dot gain relative contrast trapping percentage printing quality |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《包装工程》浏览原始摘要信息 |
|
点击此处可从《包装工程》下载全文 |
|
