| 三峡发电机推力轴承外循环冷却技术 |
| |
| 引用本文： | 刘平安,武中德. 三峡发电机推力轴承外循环冷却技术[J]. 大电机技术, 2008, 0(1): 7-9,12 |
| |
| 作者姓名： | 刘平安 武中德 |
| |
| 作者单位： | 1. 哈尔滨电机厂有限责任公司,哈尔滨,150040
2. 哈尔滨大电机研究所,哈尔滨,150040 |
| |
| 摘 要： | 本文介绍了三峡导轴承自泵型外循环技术.它属于滑动轴承表面形成的一种粘滞泵.在导轴承瓦滑动表面开有油兜,机组转动时滑转子将油吸入瓦块,然后将热油通过瓦块出油孔流向集油环管.润滑油经外面的油冷却器冷却,导瓦泵作为油槽和冷却器之间的油循环动力.导轴承自泵型外循环可靠性提高,损耗小.
|
| 关 键 词： | 三峡 自泵型导轴承 外循环 |
| 文章编号： | 1000-3983（2008）01-0007-03 |
| 收稿时间： | 2007-07-10 |
| 修稿时间： | 2007-07-10 |
Technology of External Circulation of Thrust Bearing for Three Gorges |
| |
| LIU Ping-an,WU Zhong-de. Technology of External Circulation of Thrust Bearing for Three Gorges[J]. Large Electric Machine and Hydraulic Turbine, 2008, 0(1): 7-9,12 |
| |
| Authors: | LIU Ping-an WU Zhong-de |
| |
| Abstract: | The technology of self pumping guide bearing for Three Gorges hydro-generator is presented in this paper.It is essentially viscosity oil-pump on the moving bearing surface.The pumping pads have pumping gaps(pockets) located in a section of their sliding surfaces.The moving bearing surfaces of the runner draws adhering oil into the gaps.The lubricating oil is cooled by an external oil-water cooler.The circulation of the lubricating oil between the bearing casing and the external oil cooler is ensured by self pumping bearing.The advantages of the new bearing are improved operating reliability and reduced losses. |
| |
| Keywords: | Three Gorges self pumping guide bearing external circulation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
