| 基于Master CAM的薄壁盒体零件的数控加工与仿真 |
| |
| 引用本文： | 赵永红,宗克诚,白海峰.基于Master CAM的薄壁盒体零件的数控加工与仿真[J].新技术新工艺,2011(10):42-45. |
| |
| 作者姓名： | 赵永红 宗克诚 白海峰 |
| |
| 作者单位： | 中国电子科技集团公司第38研究所,安徽 合肥,230031 |
| |
| 摘 要： | 薄壁零件是由各种薄型板（壳）和加强筋构成的轻量化结构，相对刚度较低、加工工艺性差，在切削力、装夹力等因素作用下极易发生变形和振动，制造难度极大。本文通过对薄壁盒体零件数控工艺的合理制定，基于MasterCAM软件进行工艺参数设置，模拟仿真加工并自动生成数控程序，有效防止薄壁盒体在加工中产生变形、振动现象，从而实现薄壁盒体零件的高精、高速和高效加工。
|
| 关 键 词： | Master CAM 薄壁盒体 加工变形 数控仿真加工 |
CNC Machining and Simulation of Thin Wall Box Parts Based on Master CAM |
| |
| ZHAO Yonghong,ZONG Kecheng,BAI Haifeng.CNC Machining and Simulation of Thin Wall Box Parts Based on Master CAM[J].New Technology & New Process,2011(10):42-45. |
| |
| Authors: | ZHAO Yonghong ZONG Kecheng BAI Haifeng |
| |
| Affiliation: | ZHAO Yonghong,ZONG Kecheng,BAI Haifeng(No.38 Research Institute of CETC,Hefei 230031,China) |
| |
| Abstract: | Thin-walled parts are composed by various thin board(shell)and the tendons of strengthening as a lightweight structural parts,it has a lot of problems in the manufacturing process,such as deformation,vibration caused by cutting force,and clamping force,because of its relatively low stiffness and poor processing technology,which made it extremely difficult in the process of manufacturing.The NC processing technique of thin wall box parts,based on MasterCAM to set process parameters,simulate the process and g... |
| |
| Keywords: | Master CAM Thin wall box Deformation in machining NC machining simulation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
