首页 | 本学科首页   官方微博 | 高级检索  
     

钢管混凝土拱桥设计中的几个问题
引用本文:钟善桐.钢管混凝土拱桥设计中的几个问题[J].哈尔滨建筑大学学报,2000,33(2):13-17.
作者姓名:钟善桐
作者单位:哈尔摈建筑大学,建筑工程学院,黑龙江,哈尔滨,150090
摘    要:80年代末开始,钢管混凝土在我国公路和城市拱桥中得到应用,发展很快,在全国已建工程达一百多座。跨度最大的有乌江二桥,L=360m,采用了5-4管集束式拱肋和四川万县长江大桥,L=420m,采用了钢管混凝土劲性骨架箱形截面拱肋。在拱桥的推广应用中,出现了很多创新工作,对钢管混凝土在桥梁工程的应用中作出了贡献。同时,在某些设计中也还存在一些不足之外,作者就这些问题提出了建议,供有关方面参考。

关 键 词:钢管混凝土拱桥  拱肋截面型式  吊杆  施工  设计
文章编号:1006-6780(2000)02-0013-05
修稿时间:1999-09-14

Several problems in the design of Concrete Filled Steel Tubular(CFST) arch bridges
ZHONG Shan-tong.Several problems in the design of Concrete Filled Steel Tubular(CFST) arch bridges[J].Journal of Harbin University of Civil Engineering and Architecture,2000,33(2):13-17.
Authors:ZHONG Shan-tong
Affiliation:ZHONG Shan-tong ;(School of Civil Engineering & Architecture,Harbin University of Civil Engineering & Architecture,Harbin 150090,China)
Abstract:Since the late of 80's, the CFST structures had been adopted in the highway and city arch bridges, the development is very rapid. There were over 100 bridges through the country. The largest span belongs to the Wu-river 2nd bridge, L = 360m, adopted the 5 -4 tubes gathered bunch arch ribs, and the Yangzi river bridge of Wan Country, Sichuan Province, L =420m, adopted CFST framework box cross - section arch ribs. In the application, there are many creative works, which make a contribution to the application of CFST for bridge engineering. But, there are several problems in the designs also. About. these problems author gives some suggestions, which are available for reference.
Keywords:CFST  arch bridge  type of cross section of arch ribs  hangers and erections
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号