| 紫外光固化快速成形中提高加工效率的方法 |
| |
| 引用本文： | 赵吉宾,李爱民.紫外光固化快速成形中提高加工效率的方法[J].机床与液压,2006(5):1-3. |
| |
| 作者姓名： | 赵吉宾 李爱民 |
| |
| 作者单位： | 1. 中国科学院沈阳自动化研究所先进制造技术重点实验室,沈阳辽宁,110016
2. 济南二机床集团有限公司,山东济南,250022 |
| |
| 摘 要： | 光固化成形是一种基于逐层累加方式发展起来的新的制作工艺，零件的加工效率是成形中需要考虑的关键问题之一。本文分析了影响加工效率的三个因素，即扫描参数、制作方向和扫描方向，并通过实验证明了优化制作工艺能够显著提高零件的制作效率。
|
| 关 键 词： | 光固化成形 加工效率 制作方向 扫描方向 |
| 文章编号： | 1001-3881(2006)5-001-3 |
| 收稿时间： | 2005-05-31 |
| 修稿时间： | 2005年5月31日 |
Method of Improving Machining Efficiency for the UV Stereolithography |
| |
| ZHAO Jibin,LI Aimin.Method of Improving Machining Efficiency for the UV Stereolithography[J].Machine Tool & Hydraulics,2006(5):1-3. |
| |
| Authors: | ZHAO Jibin LI Aimin |
| |
| Affiliation: | 1. Key Lab of Advanced Manufacture Technology, Shenyang Institute of Automation Academy of Sciences, Shenyang Liaoning 110016, China; 2. Jinan 2^nd Machine Tool Group Co. Ltd. , Jinan Shandong 250022, China |
| |
| Abstract: | Stereolithography is a novel fabrication process based on and developed by layer manufacturing, and the fabrication efficiency of the prototyping parts is one of the key issues during manufacturing. Three factors affecting fabrication efficiency were ana- lyzed, that is scanning parameters, fabrication direction and scanning direction. Experiment shows that optimization of fabrication process can obviously improve the fabrication efficiency, |
| |
| Keywords: | Stereolithography Fabrication efficiency Fabrication direction Scanning direction |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
