| 0Cr17Ni7新型不锈钢板材的冲裁性能研究 |
| |
| 引用本文： | 陈明和,傅桂龙,张中元,周建华,余亚平,陈可与.0Cr17Ni7新型不锈钢板材的冲裁性能研究[J].中国制造业信息化,2000,29(1):51-52. |
| |
| 作者姓名： | 陈明和 傅桂龙 张中元 周建华 余亚平 陈可与 |
| |
| 作者单位： | 1. 南京航空航天大学,南京,210016
2. 扬州电大宝应分校,江苏宝应,225800 |
| |
| 摘 要： | 0Cr17Ni7是为生产国产新型高档列车而专门研制的不锈钢板材。为满足国内列车生产厂的冲压生产需要,我们对5种不同厚度(d=10,15,20,25,30)的该种板材进行冲裁性能试验,得出其在各种不同相对间隙下的不同板厚的冲裁性能数据,以便于工厂生产时参考和选用。
|
| 关 键 词： | 不锈钢 板材 冲裁 冲裁间隙 |
Performance Research On OCr17Ni7 Stainless Steel Punching |
| |
| Cheng Minghe,Fu Guilong,Zhang Zhongyuan,Zhou Jianhua,Yu Yaping.Performance Research On OCr17Ni7 Stainless Steel Punching[J].Manufacture Information Engineering of China,2000,29(1):51-52. |
| |
| Authors: | Cheng Minghe Fu Guilong Zhang Zhongyuan Zhou Jianhua Yu Yaping |
| |
| Abstract: | The paper describe the design about OCr17Ni7 steel for civil new-type advanced cars. In order to meet punching manufacturing in civil factories, the experiments on this steel with 5 different sizes have been done.The experiment shows punching data under different interval and different size for factory choosing reference. |
| |
| Keywords: | Stainless Steel Board Punching Punching Interval |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
