首页 | 本学科首页   官方微博 | 高级检索  
     

HVOF喷涂Ni基涂层性能的研究
引用本文:李方坡,王引真,王 纬. HVOF喷涂Ni基涂层性能的研究[J]. 中国表面工程, 2006, 19(4): 25-27
作者姓名:李方坡  王引真  王 纬
作者单位:中国石油大学(华东)机电工程学院,山东,青岛,266555
基金项目:山东省东营市科学技术发展计划
摘    要:采用超音速火焰喷涂技术(HVOF)制备了3种镍基涂层,并对涂层的性能进行测试。结果表明:烧结粉末Ni60制备的涂层结合强度达44.6MPa、显微硬度963.8HV,均明显优于包覆粉末Ni包C、Ni包MoS2制备的涂层;Ni包C涂层孔隙率最高,达5.4%,并含有许多的未熔软质相;涂层中的镍起粘结作用,能显著提高涂层的结合强度和显微硬度;起减磨作用的MoS2和C相会明显降低涂层的结合强度。

关 键 词:超音速火焰喷涂(HVOF)  Ni基涂层  涂层性能
文章编号:1007-9289(2006)04-0025-03
收稿时间:2006-02-17
修稿时间:2006-02-172006-04-14

Research on the Properties of HVOF Ni-based Coatings
LI Fang-po,WANG Yin-zhen,WANG wei. Research on the Properties of HVOF Ni-based Coatings[J]. China Surface Engineering, 2006, 19(4): 25-27
Authors:LI Fang-po  WANG Yin-zhen  WANG wei
Affiliation:College of Mechanical and Electron Engineering, China University of Petroleum, Qingdao Shandong 266555
Abstract:Three Ni-base coatings by High Velocity Oxygen Fuel (HVOF) spraying were prepared, and their properties were examined in this paper. The results showed that the bonding strength and micro-hardness of Ni60 coating reached 44.6MPa and 963.8HV respectively, which were obviously higher than Ni wrapped C and Ni wrapped MoS2 coatings. The porosity of Ni wrapped C coating was highest of all up to 5.4 %. There was plenty of non-melted phase in the coating; Ni in coatings played the role of adhesion, which can increase bonding strength and micro-hardness of coatings; However, MoS2 and C might decrease bonding strength and micro-hardness obviously.
Keywords:high velocity oxygen Fuel (HVOF) spraying  Ni-based coatings  properties of coatings
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《中国表面工程》浏览原始摘要信息
点击此处可从《中国表面工程》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号