Numerical simulation in powder compaction of metallurgy component |
| |
作者单位: | College of Mechanical Engineering South China University of Technology,College of Mechanical Engineering,South China University of Technology,College of Mechanical Engineering,South China University of Technology,College of Mechanical Engineering,South China University of Technology,Guangzhou 510640,China,Guangzhou 510640,China,Guangzhou 510640,China,Guangzhou 510640,China |
| |
基金项目: | 国家自然科学基金;广东省自然科学基金 |
| |
摘 要: | 1Introduction Forming multi-level component in die compaction,the density is more or less inhomogeneous depending onthe part geometry,the tool design and the frictionbetween powder and die wall1?3].The productdistortions are result of inhomogeneous densi…
|
收稿时间: | 28 February 2006 |
Numerical simulation in powder compaction of metallurgy component |
| |
Authors: | Chun-man HUANG Pu-qing CHEN Ming SHAO Yuan-yuan LI |
| |
Affiliation: | aCollege of Mechanical Engineering, South China University of Technology, Guangzhou 510640, China |
| |
Abstract: | Some flow stress models was used to simulate the compaction of a cylindrical specimen.A new flow stress model was presented by analyzing and summarizing the powder compact experiment with different initial densities.Compared with other models,the new model fits better with the experiments.The compaction process of a synchronizer hub was simulated with new model and the synchronizer hub shape was improved by the simulation results.The density distribution was measured and compared with the simulation results of splitting the samples into pieces.The comparison shows that the model could be used to simulate the powder compact process in an efficient and accurate manner.And the results indicate that the density distribution is homogenous after optimization. |
| |
Keywords: | powder compaction design distribution numerical simulation |
本文献已被 CNKI 万方数据 ScienceDirect 等数据库收录! |