塔里木油田特殊倒角接箍油管的应用分析 |
| |
引用本文: | 杨向同,吕拴录,闻亚星,李宁,黄世财,耿海龙. 塔里木油田特殊倒角接箍油管的应用分析[J]. 石油钻采工艺, 2015, 37(4): 127-130. DOI: 10.13639/j.odpt.2015.04.032 |
| |
作者姓名: | 杨向同 吕拴录 闻亚星 李宁 黄世财 耿海龙 |
| |
作者单位: | 1.塔里木油田油气工程研究院,新疆库尔勒 841000 |
| |
摘 要: | 通过对塔里木油田油管使用情况进行调查研究,认为90°台肩接箍油管在起下作业过程中容易损坏封井器密封胶芯,在套管柱结构变化处、在水平井和大斜度井经常阻卡。笔者对现有18°特殊倒角接箍油管和20°特殊倒角接箍油管使用效果进行调查研究,认为采用这2种特殊倒角接箍油管均可以避免上述问题。对18°特殊倒角接箍油管和20°特殊倒角接箍油管在使用过程中的受力情况进行了分析计算,认为18°特殊倒角接箍台肩承载面比20°特殊倒角接箍承载面受力更合理。为了减少油管品种,并保证油管使用性能,应当采用18°特殊倒角接箍油管。对如何从现有的90°台肩接箍油管和20°特殊倒角接箍油管过渡到18°特殊倒角接箍油管提出了具体的建议。
|
关 键 词: | 油管 接箍 特殊倒角 阻卡 塔里木油田 |
收稿时间: | 2019-05-19 |
Application analysis of tubing with specially cham fer collar in Tarim Oilifeld |
| |
Affiliation: | 1.Oil &2.Gas Engineering Research Institute of Tarim Oil Field, Korla, 841000, China |
| |
Abstract: | Investigation on application of tubing in Tarim Oilfield indicates that the tubing with 90° shoulder collar may damage the rubber element of BOP during trips, and is often stuck at changes of casing string and in horizontal wells or highly-deviated wells. After investigation on the effectiveness of tubing with 18° specially and 20° specially chamfer collar, the author thinks that the use of these two types can avoid the above problems. Analytical calculation was conducted to the stress state of tubing with 18° or 20° specially chamfer collar during its use, and it was thought that the bearing surface of the 18° specially chamfer collar is more reasonable for bearing stress than that of the 20°. Hence, in order to reduce the types of tubing and ensure the service performance of tubing, the tubing with 18° specially chamfer collar should be used. This paper also makes suggestions as to how to transit from tubing with 90° shoulder collar and 20° specially chamfer collar to that with 18°. |
| |
Keywords: | |
本文献已被 CNKI 万方数据 等数据库收录! |
| 点击此处可从《石油钻采工艺》浏览原始摘要信息 |
|
点击此处可从《石油钻采工艺》下载全文 |
|