| 干摩擦条件下SiC/MoSi_2与WC-Co对磨时的磨损特性研究 |
| |
| 引用本文： | 席俊杰,吴中.干摩擦条件下SiC/MoSi_2与WC-Co对磨时的磨损特性研究[J].粉末冶金技术,2010,28(4). |
| |
| 作者姓名： | 席俊杰 吴中 |
| |
| 作者单位： | 1. 郑州航空工业管理学院,机电工程学院,郑州,450015
2. 新乡学院机电工程学院,河南新乡,453003 |
| |
| 摘 要： | 采用扫描电镜和能谱仪观察和测定了SiC/MoSi2复合材料与WC-Co对磨试样的磨损表面和磨屑的形貌及成分,研究了SiC/MoSi2复合材料与WC-Co摩擦副的干摩擦磨损性能和磨损机理。研究结果表明:SiC/MoSi2复合材料与WC-Co摩擦副的主要磨损机制在初始磨损阶段主要由微观断裂机制控制,并伴有粘着磨损、磨粒磨损和氧化磨损;在稳定磨损阶段由粘着磨损机制控制,并伴有微观断裂和氧化磨损。SiC/MoSi2复合材料与硬度较大的WC-Co磨轮对磨时的磨损率比与硬度较小的CrWMn钢磨轮对磨时的磨损率低。
|
| 关 键 词： | SiC/MoSi2复合材料 干摩擦 磨损机理 |
Research on wear properties of SiC/MoSi_2 composites against WC-Co under dry friction condition |
| |
| Xi Junjie,Wu Zhong.Research on wear properties of SiC/MoSi_2 composites against WC-Co under dry friction condition[J].Powder Metallurgy Technology,2010,28(4). |
| |
| Authors: | Xi Junjie Wu Zhong |
| |
| Affiliation: | Xi Junjie1),Wu Zhong2)1)(School of Mechatronics Engineering,Zhengzhou Institute of Aeronautical Industry Management,Zhengzhou 450015,China) 2)(Mechanical and Electrical Engineering College,Xinxiang University,Xinxiang He'nan 453003,China) |
| |
| Abstract: | Appearance and composition of wear surface and wear debris of SiC/MoSi2 composites rabbing against WC-Co were observed and determined by means of SEM and EDS.The dry friction and wear properties and wear mechanism of SiC/MoSi2 composites rabbing against WC-Co were studied.The results of research show that the wear mechanism of SiC/MoSi2 composites rabbing against WC-Co is mainly microfracture companied with adhesive wear,abrasive wear and oxidation wear at the beginning of wear,and adhesive wear companied w... |
| |
| Keywords: | WC-Co |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
