Highly branched polyurethane acrylates and their waterborne UV curing coating

A series of UV curable highly branched waterborne polyurethane acrylates (BWPUAs) were synthesized using an “oligomeric A₂ + B₃” approach. The thiol-endcapped difunctional oligomeric A₂ was synthesized first by the addition reaction of isophorone diisocyanate, α,α-dimethylol propionic acid and 2-hydroxyethyl acrylate, then further underwent thiol-Michael reaction with 1,6-hexamethylene bis(thioglycolic acetate). Trimethylolpropane triacrylate was used as a B₃ monomer. The molecular structures were characterized with FT-IR and ¹H NMR spectroscopy. 1,6-Hexanediol diacrylate (HDDA) was incorporated into the polymeric chain for preparing the HDDA-modified BWPUAs (BWPUA-Hs). For the comparison, the linear waterborne polyurethane acrylate (LWPUA) was synthesized. The UV curing kinetics study results by using the photo-DSC approach showed that the BWPUAs possessed higher photopolymerization rate and final unsaturation conversion in the UV cured films compared with the LWPUA, which increased with the increase of unsaturation concentration in BWPUA. Moreover, the photopolymerization performance, and water and solvent resistance properties were greatly enhanced by the incorporation of HDDA segment into the BWPUA chain. The dynamic mechanical thermal analysis results showed that the elastic modulus in the rubbery plateau, and the glass transition temperature of UV cured film increased with increasing unsaturation concentration in BWPUA, whereas decreased with the introduction of HDDA flexible segment. The thermogravimetric analysis confirmed the high thermal stability of UV cured BWPUA films. All UV cured BWPUA and BWPUA-H films showed better flexibility and middle refractive indices due to the thioether linkage in the polymer network.