首页 | 本学科首页   官方微博 | 高级检索  
     

无源滤波装置的建模分析及参数摄动的影响
引用本文:王立国,徐殿国,苗立杰,关柏利.无源滤波装置的建模分析及参数摄动的影响[J].中国电机工程学报,2005,25(10):70-74.
作者姓名:王立国  徐殿国  苗立杰  关柏利
作者单位:1. 哈尔滨工业大学电气工程系,黑龙江省,哈尔滨市,150001
2. 哈尔滨电站设备集团公司,黑龙江省,哈尔滨市,150040
基金项目:国家自然科学基金重大项目(19990510),黑龙江省自然科学基金重大项目(ZJG03-1)。~~
摘    要:给出了无源滤波装置参数设计的建模方法。根据Thevenin定理与Norton定理对无源滤波装置在基波与谐波下的工作状态分别建模分析。基于数值方法,分析了电网电抗及电网频率摄动时流入滤波装置各通道基波电流的变化过程。通过符号计算,给出了流入电网及各滤波通道谐波电流的表达式。数值分析与现场实测结果表明,应用该文所给方法设计的滤波装置后进入电网的谐波符合国家GB/T-14549-93标准,功率因数由原来的0.82提高到0.94。

关 键 词:电力系统  电网  无功补偿  无源滤波装置  建模分析  参数摄动
文章编号:0258-8013(2005)10-0070-05
修稿时间:2004年12月13

A MODELING ANALYSIS OF PASSIVE POWER DEVICE AND INFLUENCE OF PARAMETER PERTURBATION ON POWER SYSTEM
WANG Li-guo,XU Dian-guo,MIAO Li-jie,GUAN Bai-li.A MODELING ANALYSIS OF PASSIVE POWER DEVICE AND INFLUENCE OF PARAMETER PERTURBATION ON POWER SYSTEM[J].Proceedings of the CSEE,2005,25(10):70-74.
Authors:WANG Li-guo  XU Dian-guo  MIAO Li-jie  GUAN Bai-li
Affiliation:WANG Li-guo1,XU Dian-guo1,MIAO Li-jie2,GUAN Bai-li1
Abstract:A modeling method of designing parameter of passive power device is presented. The work conditions of passive power device were modeled and analyzed according to Thevenin theorem and Norton theorem, respectively. Under the perturbation of source impedance and frequency of the power system, changes in fundamental current of inject into every filter of passive power device was analyzed based on numerical method. Expressions of harmonic current of inject into every filter of passive power device were given through character calculation. The numerical analysis and practice measure show that, the harmonic currents of inject into power system accord with national criterion GB/T-14549-93 and its power factor is increased to 0.94 from before 0.82.
Keywords:Passive power device  Modeling  Parameter perturbation  Harmonic current  Compensation of reactive power
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号