Properties of cu-doped low resistive ZnSe films deposited by two-sourced evaporation |
| |
Authors: | Zulfiqar Ali Akram K.S. Aqili |
| |
Affiliation: | a Thermal Physics Laboratory, Department of Physics, Quaid-i-Azam University, Islamabad 45320, Pakistan b Department of Physics, The Hashemite University, Zarka, Jordan c Optics Laboratories, PO Box 1021, Islamabad, Pakistan |
| |
Abstract: | Two-sourced evaporation technique is used to prepare hard ZnSe films by controlling the evaporation rates of both Zn and Se at substrate temperature of 400 °C. The films are doped with Cu by immersion in the Cu(NO3)2-H2O solution for different periods of time. The XRD has not shown a drastic change in the film structure while the electrical resistivity of the deposited film dropped from 109 Ω-cm to about 1.6 Ω-cm for solution immersed films after heat treatment. Optical properties of deposited and doped films, such as film thickness, absorption coefficient and optical band gap have been calculated from the normal transmission spectra in the range of 300-2200 nm.The optical results show a decrease of the transmission and an increase of the refractive index and a slight shift in the optical band gap. Chemical composition of the Cu is determined by using absorption of immersed films. The composition of Cu is also compared with the composition detected by electron microprobe analyzer (EMPA). |
| |
Keywords: | Thermal coating ZnSe thin films Optical Electrical |
本文献已被 ScienceDirect 等数据库收录! |
|