首页 | 本学科首页   官方微博 | 高级检索  
     

遮光法测量铝薄板高压加载下的动态特征量
引用本文:袁蓓,姚红兵,张永康,佟艳群,孟春梅. 遮光法测量铝薄板高压加载下的动态特征量[J]. 激光技术, 2011, 35(1): 19. DOI: 10.3969/j.issn.1001-3806.2011.01.006
作者姓名:袁蓓  姚红兵  张永康  佟艳群  孟春梅
作者单位:1.江苏大学江苏省光子制造科学与技术重点实验室, 镇江 212013
基金项目:国家自然科学基金资助项目,中国博士后科学基金特别资助项目,中国博士后科学基金资助项目,江苏省博士后基金资助项目,江苏省2009年度普通高校研究生科研创新计划资助项目
摘    要:为了检测强脉冲激光冲击加载材料发生的动态变化,采用遮光原理设计了一种新的检测仪器,能较为准确地检测出在冲击过程中试样的动态特征量。结果表明,铝薄板(L2)在激光冲击成形过程中弹性变形和塑性变形同时存在,塑性变形的时间远远大于弹性变形。试样中心区域在弹性变形阶段的平均变形速率为3.2103m/s,试样的平均应变率为8.9 104s-1。该结果为相关激光冲击成形技术发展提供了实验依据。

关 键 词:激光技术   激光冲击成形   遮光原理   变形速度   应变率
收稿时间:2010-03-15

Dynamic characteristics of thin aluminum under high pressure loading measured by shading principle
YUAN Bei,YAO Hong-bing,ZHANG Yong-kang,TONG Yan-qun,MENG Chun-mei. Dynamic characteristics of thin aluminum under high pressure loading measured by shading principle[J]. Laser Technology, 2011, 35(1): 19. DOI: 10.3969/j.issn.1001-3806.2011.01.006
Authors:YUAN Bei  YAO Hong-bing  ZHANG Yong-kang  TONG Yan-qun  MENG Chun-mei
Abstract:In order to measure dynamic characteristics of a specimen in the laser shock forming laser shock forming accurately, a new experimental device was designed to detect the dynamic change of the loaded material based on shading principle. The experimental results indicate that elastic deformation and plastic deformation of 1060 thin aluminum coexist during the process of laser shock forming, and the existence of plastic deformation period is far longer than the elastic deformation. Based on the experiment, it can be calculated that the average speed of elastic deformation and average strain rate of the sample in central area are 3.2103m/s and 8.9104s-1 respectively. The results provide the experimental evidence for the development of relevant laser shock forming technology.
Keywords:
本文献已被 万方数据 等数据库收录!
点击此处可从《激光技术》浏览原始摘要信息
点击此处可从《激光技术》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号