MICRO-ROBOT FOR MEASUREMENT AND THREE-DIMENSION RECONSTRUCTION OF MICROPIPES |
| |
Authors: | Li Jiangxiong Ke Yinglin Guo Tong Wu Enqi Jin Chengzhu |
| |
Affiliation: | Institute of Manufacturing Engineering, Zhejiang University, Hangzhou 310027,China |
| |
Abstract: | The presented system consists of field devices, a control system and a host computer sys-tem. The field devices, which are composed of an in-pipe micro-robot, a displacement sensor, a cur-vature sensor, and an inner surface measurement unit, can go into the pipe to get the data of displace-ment and axis curvature, and the shape data of the inner surface. With the conic-shape laser beam shotby the inner surface measurement unit, the intersectional curve between the laser beam and the in-ner-surface of the tested pipe can be calculated in the local coordination system (LCS) of the innersurface measurement unit. The relation between the LCS and the global coordination system (GCS)can be deduced, too. After the robot reaches the end of the pipe, all measured intersectional curvescan be translated into the same coordination system to become a point cloud of the inner surface ofthe pipe according to the relations between LCS and GCS. Depending on this points cloud, the CADmodel of the inner surface of the pipe can be reconstructed easily with reverse engineering tools, andthe feature of flaw of the pipe can be obtained with flaw analysis tools. |
| |
Keywords: | 3D reconstruction Curved micro-pipe In-pipe micro-robot |
本文献已被 CNKI 维普 万方数据 等数据库收录! |
|