| 特材换热器胀接工艺评定研究 |
| |
| 引用本文： | 袁彪,郑杨艳,王应植,马歆,唐支翔,奚延安.特材换热器胀接工艺评定研究[J].压力容器,2010,27(6):37-42. |
| |
| 作者姓名： | 袁彪 郑杨艳 王应植 马歆 唐支翔 奚延安 |
| |
| 作者单位： | 1. 江苏省特种设备安全监督检验研究院,江苏南京,210003
2. 南京宝色钛业有限公司,江苏南京,211100 |
| |
| 基金项目： | 江苏省质量技术监督局科技项目 |
| |
| 摘 要： | 以锆材换热器管子-管板接头的胀接试验研究为基础,分析了特材换热器管子-管板接头的特点和胀接工艺方面的特殊要求,提出了特材换热器胀接工艺评定的项目、要求和方法。
|
| 关 键 词： | 换热器 管子-管板接头 胀接工艺评定 |
Research on Expanding procedure qualification of Special Material Heat Exchangers |
| |
| YUAN Biao,ZHENG Yang-yan,WANG Ying-zhi,MA Xin,TANG Zhi-xiang,XI Yan-an.Research on Expanding procedure qualification of Special Material Heat Exchangers[J].Pressure Vessel Technology,2010,27(6):37-42. |
| |
| Authors: | YUAN Biao ZHENG Yang-yan WANG Ying-zhi MA Xin TANG Zhi-xiang XI Yan-an |
| |
| Affiliation: | 1. Jiangsu Province Special Equipment Safety Supervision Inspection Institute, Nanjing 210003, China; 2. Nanjing Baose Titanium Industry Co. , Ltd. , Nanjing 211100, China) |
| |
| Abstract: | Based on results of expanding test of tube - to - tubesheet joints of Zirconium heat exchangers, characteristic of tube - to - tuhesheet joints, and special demands of expanding technology were ana- lyzed. Expanding procedure qualification demands and methods of special material heat exchangers were proposed. |
| |
| Keywords: | heat exchanger tube - to - tubesheet joint expanding procedure qualification |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
