首页 | 本学科首页   官方微博 | 高级检索  
     

基于遗传算法的产品装配序列规划研究
引用本文:蒋超,吴波,李明宇,赵勇力,王小成.基于遗传算法的产品装配序列规划研究[J].机械与电子,2012(4):7-11.
作者姓名:蒋超  吴波  李明宇  赵勇力  王小成
作者单位:1. 华中科技大学机械科学与工程学院,湖北武汉,430074
2. 南车青岛四方机车车辆股份有限公司,山东青岛,266111
基金项目:“十一五”国家科技支撑计划(2009BAG12A01-G01-3)
摘    要:为解决产品实际装配过程装配序列规划的问题,建立了描述装配过程中零部件间装配关系的几何干涉关系矩阵。设计了以装配换向次数、装配工具更换次数、装配体稳定性和基础件位置为目标函数的遗传算法,并改进了该遗传算法相应的交叉算子、变异算子和适应度函数,以确保算法的有效性。在初始种群生成时,输入由DELMIA软件虚拟拆卸得到的几何可行装配序列,改善种群的组成成份。将该遗传算法应用于某链轮的装配序列规划中,验证了该算法的有效性。

关 键 词:装配序列规划  遗传算法  基础件

Product Assembly Sequence Planning Based on Genetic Algorithm
JIANG Chao , WU Bo , LI Ming-yu , ZHAO Yong-li , WANG Xiao-cheng.Product Assembly Sequence Planning Based on Genetic Algorithm[J].Machinery & Electronics,2012(4):7-11.
Authors:JIANG Chao  WU Bo  LI Ming-yu  ZHAO Yong-li  WANG Xiao-cheng
Affiliation:1.School of Mechanical Science and Technology,Huazhong University of Science and Technology,Wuhan 430074,China;2.CSR Qingdao Sifang Locomotive and Rolling Stock Co.,Ltd.,Qingdao 266111,China)
Abstract:The improved genetic algorithm,based on the interference matrix which was establish-ed to describe the geometric interference relations in the components and the objective function considering of the assembly reorientation times,assembly tool change times,the assembly body stability and the assembly basis parts position in the sequence,was used to solve the assembly sequence planning problem.Appropriate crossover operator,mutation operator and fitness function were improved to plan the product assembly sequence which was closer to the actual assembly process.While the primary population is forming,the making up composition of feasible assembly sequence for population improvement that obtained from virtual disassembly sequence with DELMIA software could be inputted.A case study was given to illustrate the availability of the improved algorithm.
Keywords:assembly sequence planning  genetic algorithm  assembly basis part
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号