| 输送带接头剖层机输送辊的优化分析 |
| |
| 引用本文： | 李大磊,张伟旺,张绍林.输送带接头剖层机输送辊的优化分析[J].机械设计与制造,2012(1):216-218. |
| |
| 作者姓名： | 李大磊 张伟旺 张绍林 |
| |
| 作者单位： | 郑州大学机械工程学院,郑州,450001 |
| |
| 基金项目： | 河南省自然科学研究计划项目 |
| |
| 摘 要： | 应用于橡胶输送带接头冷粘结工艺的输送带阶梯剖层机,进给部分主要由上、下输送辊组成,输送辊要求有足够的强度和刚度,且结构轻巧。基于SolidWorks Simulation有限元分析软件对输送辊进行静应力及变形分析,并借助分析结果确定输送辊采用空心结构形式,并对轻质材料铝合金2A11和镁合金AZ61M性能进行比对分析,实现了输送辊的优化设计。
|
| 关 键 词： | 输送辊 优化分析 有限元 SolidWorks Simulation |
Optimization analysis for conveying roller of conveyor joint splitting machine |
| |
| LI Da-lei
,
ZHANG Wei-wang
,
ZHANG Shao-lin.Optimization analysis for conveying roller of conveyor joint splitting machine[J].Machinery Design & Manufacture,2012(1):216-218. |
| |
| Authors: | LI Da-lei ZHANG Wei-wang ZHANG Shao-lin |
| |
| Affiliation: | (School of Mechanical Engineering,Zhengzhou University,Zhengzhou 450001,China) |
| |
| Abstract: | The ladder splitting machine is applied in cold bonding process of rubber conveyor joint,which feeding mechanism is made of upper and lower conveyor rollers with sufficient strength and rigidity,and lightweight structure.Then the static stress and deformation analysis of conveyor roller is conducted based on FEM of SolidWorks Simulation,which result shall be applied to determine the conveyor roller structure in the form of hollow.Afterwards,properties of two kinds of lightweight materials of aluminum alloy 2A11 and magnesium alloy AZ61M are compared,and the optimization design of the conveyor roller is realized. |
| |
| Keywords: | Conveyor roller Optimization analysis FEA SolidWorks simulation |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
