|
|||||
|
|
Thermally integrated fuel processor design for fuel cell applications |
|
| Authors: | William F Northrop Sang Ok Choi Levi T Thompson |
| Affiliation: | 1. Department of Mechanical Engineering, University of Michigan, Ann Arbor, MI 48109, USA;2. Hydrogen Energy Technology Laboratory, University of Michigan, Ann Arbor, MI 48109, USA;3. Department of Chemical Engineering, University of Michigan, Ann Arbor, MI 48109, USA;4. Department of Mechanical Engineering, University of Minnesota, Minneapolis, MN 55455, USA |
| Abstract: | Effective thermal integration could enable the use of compact fuel processors with PEM fuel cell-based power systems. These systems have potential for deployment in distributed, stationary electricity generation using natural gas. This paper describes a concept wherein the latent heat of vaporization of H2O is used to control the axial temperature gradient of a fuel processor consisting of an autothermal reformer (ATR) with water gas shift (WGS) and preferential oxidation (PROX) reactors to manage the CO exhaust concentration. A prototype was experimentally evaluated using methane fuel over a range of external heat addition and thermal inputs. The experiments confirmed that the axial temperature profile of the fuel processor can be controlled by managing only the vapor fraction of the premixed reactant stream. The optimal temperature profile is shown to result in high thermal efficiency and a CO concentration less than 40 ppm at the exit of the PROX reactor. |
| Keywords: | Fuel processing Thermal integration Fuel cell Autothermal Reforming Methane |
| 本文献已被 ScienceDirect 等数据库收录！ | |