| ZR22B52″型二十辊森吉米尔轧机辊系分析技术研究 |
| |
| 引用本文： | 贾志伟,李元华,张海利,李莉,庞树芳.ZR22B52″型二十辊森吉米尔轧机辊系分析技术研究[J].轧钢,2007,37(4):74-77. |
| |
| 作者姓名： | 贾志伟 李元华 张海利 李莉 庞树芳 |
| |
| 作者单位： | 1.鞍钢集团钢铁研究院,辽宁鞍山114009；2.鞍钢股份冷轧硅钢厂,辽宁 鞍山 114009 |
| |
| 摘 要： | 以ZR22B52″二十辊森吉米尔轧机为研究对象，建立了辊系空间位置模型，并对辊缝变化与辊径、压下调整、侧偏心调整之间的关系进行了计算分析，开发出具有轧线调整参数及轧辊配置计算等功能的分析系统。应用结果表明，辊系空间位置计算结果与现场实际拟合度良好，相应工况条件下计算误差为1~13 μm，实现了精确、快速的辊系配置参数离线分析，为该轧机辊系分析提供了参考和量化依据。
|
| 关 键 词： | 二十辊森吉米尔轧机 辊系 空间位置模型 系统开发 |
| 收稿时间： | 2019-07-24 |
Research on the roll system analysis technology of ZR22B52″ 20-high Sendzimir rolling mill |
| |
| JIA Zhi wei,LI Yuan hua,ZHANG Hai li,LI Li,PANG Shu fang.Research on the roll system analysis technology of ZR22B52″ 20-high Sendzimir rolling mill[J].Steel Rolling,2007,37(4):74-77. |
| |
| Authors: | JIA Zhi wei LI Yuan hua ZHANG Hai li LI Li PANG Shu fang |
| |
| Affiliation: | 1.Iron and Steel Research Institutes,AnSteel Group Corporation,Anshan 114009,China；;
2.Cold Rolled Silicon Steel Plant，Angang Steel Company Limited,Anshan 114009,China |
| |
| Abstract: | Taking the ZR22B52″ 20-high Sendzimir mill for an example,the spatial position model of roll system was established.The relationships between roll gap and roll diameter,screwdown adjustment and eccentricity adjustment parameters were researched,and the off-line analysis system with pass line calculation and roll system configuration calculation was developed.The usage effect show that the roll system spatial position model match with the actual situation well,the calculation error reach 1~13 μm,and a accurate and fast off-line analysis system of mill was developed,which can provide reference and quantitative basis for roll system analysis of this mill. |
| |
| Keywords: | 20-high Sendzimir cold rolling mill roll system spatial position model analysis system development |
|
| 点击此处可从《轧钢》浏览原始摘要信息 |
|
点击此处可从《轧钢》下载全文 |
|
