| 大理石板材切边工序中切削用量的优化 |
| |
| 引用本文： | 曹腾云. 大理石板材切边工序中切削用量的优化[J]. 南昌大学学报(工科版), 1990, 0(3) |
| |
| 作者姓名： | 曹腾云 |
| |
| 作者单位： | 江西工业大学机械工程系 |
| |
| 摘 要： | 本文通过实验测量了用不同走刀速度切割大理石时金刚石锯片的磨损速率,得出了磨削比及磨耗比随走刀速度变化的关系式,提出了大理石切边工序最低加工成本优化的目标函数,并以实例进行了优化计算。
|
| 关 键 词： | 金刚石锯片 大理石板 磨削比 进给速度 优化 |
THE OPTIMIZATION OF THE TRAVERSE SPEED IN CUTTING MARBLE SLAB |
| |
| Cao Tengyun. THE OPTIMIZATION OF THE TRAVERSE SPEED IN CUTTING MARBLE SLAB[J]. Journal of Nanchang University(Engineering & Technology Edition), 1990, 0(3) |
| |
| Authors: | Cao Tengyun |
| |
| Affiliation: | Cao Tengyun Department of Mechanical Engineering |
| |
| Abstract: | In order to Optiminze the traverse speed in marble slab cutting, exper-iments were performed and the wear rates were measured. The functional relationshipbetween wear ratio and traverse speed was obtained. The objective function for cuttingat a minimum cost was established, and an example of optimization was presented. |
| |
| Keywords: | diamond sawblade marble slab grinding ratio traverse speed optimization |
| 本文献已被 CNKI 等数据库收录！ |
