| 308m^3高炉钢砖托架座结构的改进 |
| |
| 引用本文： | 杨健华,谢雨田.308m^3高炉钢砖托架座结构的改进[J].江西冶金,2000,20(1):35-36. |
| |
| 作者姓名： | 杨健华 谢雨田 |
| |
| 作者单位： | 南昌钢铁有限责任公司!江西南昌330012，南昌钢铁有限责任公司!江西南昌330012 |
| |
| 摘 要： | 根据高炉抢修时的现场条件 ,对钢砖托架座现场焊接方式进行了改进 ,减少了仰角焊 ,消除了电焊工的施工难度 ,保证了焊接质量 ,提高了焊接效率 ,节省了抢修时间。
|
| 关 键 词： | 高炉 钢砖托架座 焊接 结构改进 |
The Improvement of the Steel Brick Bracket Stand of the 308 m~3 Blast furnace |
| |
| YANG Jian hua,XIE Yu tian.The Improvement of the Steel Brick Bracket Stand of the 308 m~3 Blast furnace[J].Jiangxi Metalllurgy,2000,20(1):35-36. |
| |
| Authors: | YANG Jian hua XIE Yu tian |
| |
| Abstract: | According to worksite conditions of the urgent repairs a blast furnace,the welding method of the steel brick bracket stand is improved,the elevation angle welding is decreased and the constraction difficult of the electric welder is dispeled.Meanwhile ,the welding quality and efficiency are raised,the rush repair time is saved. |
| |
| Keywords: | blase furnace steel bricks bracket stand improvement weld |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
