| SiC_p/3003Al复合材料与3003Al的闪光对焊研究 |
| |
| 引用本文： | 李杏瑞,杨涤心,肖宏滨. SiC_p/3003Al复合材料与3003Al的闪光对焊研究[J]. 热加工工艺, 2001, 0(1) |
| |
| 作者姓名： | 李杏瑞 杨涤心 肖宏滨 |
| |
| 作者单位： | 洛阳工学院材料工程系!河南洛阳471039 |
| |
| 摘 要： | 采用连续闪光对焊的焊接方法 ,对 Si Cp/30 0 3Al复合材料与 30 0 3Al合金的焊接性进行研究。试验结果表明 :在合适的工艺参数下 ,Si Cp/30 0 3Al与 30 0 3Al合金闪光对焊焊缝区结合致密、无气孔及裂纹等缺陷 ;接头强度高且随增强相 ( Si C颗粒 )体积分数的增加而增加。因此 ,采用闪光对焊方法焊接颗粒增强型 Al基复合材料是可行的
|
| 关 键 词： | SiCp/3003Al复合材料 连续闪光对焊 接头强度 焊接性 |
Flash Butt Welding of Silicon Carbide Particulate reinforced 3003 Aluminum Composite with 3003 Aluminum |
| |
| LI Xing rui,YANG Di xin,XIAO Hong bin. Flash Butt Welding of Silicon Carbide Particulate reinforced 3003 Aluminum Composite with 3003 Aluminum[J]. Hot Working Technology, 2001, 0(1) |
| |
| Authors: | LI Xing rui YANG Di xin XIAO Hong bin |
| |
| Affiliation: | Material Enginering Department.Luoyang Institute of Technology |
| |
| Abstract: | The joining performance of SiC p particulate reinforced aluminum metal matrix composite (Al/SiC p) with 3003Al was studied by continuous flash butt welding.The results of the test have shown that under the certain welding parameter,the joints of SiC p/300Al with 3003Al are sound without any porosities and crack,and the strength of bounded joints increase with increasing SiC p volume percentage.Therefore,Continuous flash butt welding is fit for bonding SiC p/Al composite. |
| |
| Keywords: | SiC p/3003Al composite continuous flash butt welding joint strength weldability |
| 本文献已被 CNKI 等数据库收录！ |
