| 利用常用钢热探头建立淬火冷却介质数据库 |
| |
| 引用本文： | 王宇挺,张立文,裴继斌,王富岗,于程歆,于旻. 利用常用钢热探头建立淬火冷却介质数据库[J]. 金属热处理, 2004, 29(12): 33-35 |
| |
| 作者姓名： | 王宇挺 张立文 裴继斌 王富岗 于程歆 于旻 |
| |
| 作者单位： | 1. 大连理工大学,材料工程系,辽宁,大连,116023
2. 大连海威石化有限公司,辽宁,大连,116000 |
| |
| 摘 要： | 使用GCr15和H13等10余种常用钢制造新型热探头来评价淬火介质的硬化能力。测量了若干淬火介质淬火过程冷却曲线，研究了热探头淬后截面的微观组织和硬度分布。在此基础上开发的淬火介质冷却能力数据库，可以实现淬火过程冷却曲线和冷速曲线及热探头淬后组织和性能的查询和输出，且可存储热探头淬后开裂数据。
|
| 关 键 词： | 淬火介质 冷却曲线 数据库 热探头 |
| 文章编号： | 0254-6051(2004)12-0033-03 |
Development of Quenchant Database Using Thermal Probes Made of Steels |
| |
| WANG Yu-ting,ZHANG Li-wen,PEI Ji-bin,WANG Fu-gang,YU Cheng-xin,YU Min. Development of Quenchant Database Using Thermal Probes Made of Steels[J]. Heat Treatment of Metals, 2004, 29(12): 33-35 |
| |
| Authors: | WANG Yu-ting ZHANG Li-wen PEI Ji-bin WANG Fu-gang YU Cheng-xin YU Min |
| |
| Affiliation: | WANG Yu-ting~1,ZHANG Li-wen~1,PEI Ji-bin~1,WANG Fu-gang~1,YU Cheng-xin~2,YU Min~2 |
| |
| Abstract: | A new type of thermal probe made of steels such as GCr15 and H13,etc was designed to evaluate hardening power of quenchants.Cooling curves during quenching process of several quenchants were measured.Microstructure and hardness distribution on cross-section of the quenched probes were investigated.Based on the above work,a quenchant database was developed to store these experimental data.It enables inquiries and outputs of cooling curves,cooling rate curves,microstructure and hardness distribution of probes after quenching as well as information about cracked specimens. |
| |
| Keywords: | quenchant cooling curve database thermal probe |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
