首页 | 本学科首页   官方微博 | 高级检索  
     

脂肪醇聚氧乙烯(15)醚磺基琥珀酸单酯二钠盐的合成及性能
引用本文:郭振良,刘春萍,张江,刘淑芬,郭相坤,蒙延峰.脂肪醇聚氧乙烯(15)醚磺基琥珀酸单酯二钠盐的合成及性能[J].精细石油化工,2003(2):7-9.
作者姓名:郭振良  刘春萍  张江  刘淑芬  郭相坤  蒙延峰
作者单位:烟台师范学院化学系,烟台,624025
摘    要:合成了脂肪醇聚氧乙烯 ( 15 )醚磺基琥珀酸单酯二钠盐 ,以正交实验法对其合成工艺条件进行了优化研究 ,并对其表面化学性能进行了测定分析。最佳合成工艺条件 :醇醚 /顺酐 (摩尔比 ) =1∶1.0 5 ,酯化温度 75℃ ,时间 4h ;顺酐 /亚硫酸钠 (摩尔比 ) =1∶1.0 5 ,磺化温度 80℃ ,时间 2h ,最终产物收率为 97.9%。

关 键 词:阴离子表面活性剂  脂肪醇氧乙烯(15)醚磺基琥珀酸单酯二钠盐  合成  表面活性
修稿时间:2002年7月5日

STUDY ON SYNTHESIS AND PROPERTIES OF DISODIUM AEO-15 SULFOSUCCINATE
Guo Zhenliang,Liu Chunping,Zhang Jiang,Liu Shufen,Guo Xiangkun and Meng Yanfeng.STUDY ON SYNTHESIS AND PROPERTIES OF DISODIUM AEO-15 SULFOSUCCINATE[J].Speciality Petrochemicals,2003(2):7-9.
Authors:Guo Zhenliang  Liu Chunping  Zhang Jiang  Liu Shufen  Guo Xiangkun and Meng Yanfeng
Abstract:The synthetic conditions of disodium lauryl polyoxyethylene (15) sulfosuccinate and its surfactant properties were studied. The optimum reaction conditions were as follows: the molar ratio of lauryl polyoxyethylene (15) ether to maleic anhydride for esterification was 1∶1.05, the reaction temperature and time was 75 ℃ and 4 h respectively; the molar ratio of maleic anhydride to sodium sulphite for sulfonation was 1∶1.05, the sulfonation temperature and time was 80 ℃ and 2 h respectively. The yield of product was 97.9%.
Keywords:anionic surfactant  disodium lauryl polyoxyethylene (15) sulfosuccinate  synthesis  surftant property
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号