首页 | 本学科首页   官方微博 | 高级检索  
     

结合型大豆磷脂加脂剂的合成研究
引用本文:张景彬.结合型大豆磷脂加脂剂的合成研究[J].皮革与化工,2014(1):1-3,41.
作者姓名:张景彬
作者单位:齐齐哈尔大学轻工纺织学院,黑龙江齐齐哈尔161006
摘    要:通过对大豆磷脂进行H2O2氧化(羟基化)、马来酸酐酯化、中和、偏重亚硫酸钠亚硫酸化的化学改性方法,合成出了结合型磷脂加脂剂。着重研究了羟基化反应和马来酸酐酯化反应中各因素的改变对反应的影响。通过正交实验得到了H2O2氧化反应的最佳工艺条件为:反应温度65℃,反应时间5 h,H2O2用量与磷脂的质量比为20%,乳酸用量与磷脂的质量比为4%;马来酸酐酯化反应的最佳工艺为:催化剂质量分数为0.8%,反应温度100℃,反应时间3 h。

关 键 词:磷脂  过氧化氢氧化  亚硫酸化  加脂

Study on Synthesis of Combined Soybean Phospholipid Fatliqour
ZHANG Jing-bin.Study on Synthesis of Combined Soybean Phospholipid Fatliqour[J].Leather and Chemicals,2014(1):1-3,41.
Authors:ZHANG Jing-bin
Affiliation:ZHANG Jing-bin (Light industry and weaving department, Qiqihar University , Qiqihar 161006,China)
Abstract:The combined soybean phospholipid fatliqour was prepared using soybean phospholipid as raw materials through four steps: hydroxylation, esterification with maleic anhydride, neutralization, sulphitation. The effects of some factors change in the hydroxylation and esterification with maleic anhydride to the reactions were researched emphatically. The optimum conditions of the hydroxylation reaction are obtaind: temperature is 65 ~C ,time is 5h, the dosage of hydrogen peroxide and lactic acid are 20% and 4% respectively (based reaction are as follow: the dosage of reaction is 100℃, time is 3h. on the mass of phospholipid). of catalyst is 0.8% (based on the The optimum conditions of the ester mass of phospholipid), temperatureof reaction is 100℃, time is 3h.
Keywords:phospholipid  hydrogen peroxideoxidation  sulphitation  fatliqouring
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号